Turning off the power automatically (Auto Power Off)

This machine comes with a function (Auto Power Off) to turn off the power automatically if it has not been used for a certain period of time.

There are 3 types of settings for Auto Power Off, and the default factory setting is [Auto Config].

  • [Auto Config]: The power is turned off automatically if the machine has not been used for a certain period of time, except in the following situations.
    • When the LAN cable is connected to the network interface connector
    • When the wireless LAN is enabled
  • [Enable]: The power is automatically turned off if this machine has not been used for a certain period of time.
  • [Disable]: Disables the Auto Power Off function. The power does not turn off automatically.

  • Auto Power Off does not work in the following cases.
    • With the factory default settings, Auto Power Off does not work when a network (wired/wireless) is connected.
    • When an error has occurred


Follow the procedure below to change the Auto Power Off setting.


  1. Check that "Ready To Print" appears on the display.

    • If the machine is in the power save mode, press «POWER SAVE» to restore.

  2. Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and press «OK».

  3. Input the admin password using the numeric keypad, and press «OK».

    Admin password

  4. Press ▼ several times to select [Power Setup], and press «OK».

  5. When [Auto Power Off] is displayed, press «OK».

  6. Press ▲ or ▼ to select [Auto Config], [Enable] or [Disable], and press «OK».

  7. Press «ON LINE» to return to the standby screen.