Menu list
You can print to check the menu list.
- The following items are displayed when the wireless LAN module (optional) is installed.
AirPrint
Wireless(Infrastructure) Setting
- Wireless(AP Mode) Setting
Print From USB Memory
Item | Factory default settings | Description | ||
---|---|---|---|---|
Select Print File | Select the file to be printed. | |||
Print Setup | Paper Feed | Tray 1 (xx) | Specifies the paper feeding tray. (xx) is the size of the paper loaded in this tray. | |
Copies | 1 | Sets the number of copies to be printed. | ||
Duplex | On or Off *1 | Sets whether or not to implement duplex printing. | ||
Binding | Long Edge | Sets the binding method for duplex printing. | ||
Fit | On | Specifies whether to fit to the paper. | ||
Color Mode | Color | Selects whether to print in color or mono. | ||
Barcode Print Setup | Repeat | 1 | Sets the number of copies to be printed. | |
Layout Rows | 1 | Sets the number of rows on each page. | ||
Layout Columns | 1 | Sets the number of columns on each page. | ||
Start Position | X Coordinate | 5 millimeter | Sets the X coordinate of the start position (i.e. the direction perpendicular to the paper travel direction). | |
Y Coordinate | 30 millimeter | Sets the Y coordinate of the start position (i.e. the direction parallel to the paper travel direction). | ||
Spacing | X Spacing | 5 millimeter | Sets the X spacing of the scheduled printing range ofbarcode. | |
Y Spacing | 5 millimeter | Sets the Y spacing of the scheduled printing range ofbarcode. | ||
Barcode Type | QR Code | Sets the type of barcode. | ||
Barcode Attribute | Error Correction Level | Low | Sets the error correction level of QR Code. | |
Module Size | 10 x 1.7 mils | Sets the module size of QR Code | ||
Human Readable Character | None | Sets the attributes of 1D barcode. | ||
Bar Height | 29 pixels | Sets the bar height. | ||
Bar Width | 8 x 1.7 mils | Sets the bar width. |
*1 Factory default setting values are different according to the country or region.
Configuration
Item | Description | |||
---|---|---|---|---|
Tray Count | MPTray | Displays the total number of print pages for each tray. | ||
Tray1 | ||||
Tray2 | ||||
Tray3 | ||||
Tray4 | ||||
Paper Feed Roller Counter | MPTray | Displays the number of sheets fed from each tray. | ||
Tray1 | ||||
Tray2 | ||||
Tray3 | ||||
Tray4 | ||||
A4/Letter Impressions Count | Color | Displays the number of color printing sheets converted to A4/Letter paper. | ||
Mono | Displays the number of mono printing sheets converted to A4/Letter paper. | |||
Supplies Life | Cyan Toner (n.nK)* | Displays the remaining toner amount (%) of each color. *: The display may vary with the type of toner cartridge installed. | ||
Magenta Toner (n.nK)* | ||||
Yellow Toner (n.nK)* | ||||
Black Toner (n.nK)* | ||||
Cyan Drum | Displays the remaining service life (%) of image drum of each color. | |||
Magenta Drum | ||||
Yellow Drum | ||||
Black Drum | ||||
Belt | Displays the remaining service life (%) of the belt unit. | |||
Fuser | Displays the remaining service life (%) of the fuser unit. | |||
Network | Network Information | General Information | Extended Network | Displays the enabled expanded network other than the standard wired LAN1. |
Enabling Default Gateway | Displays the enabled default gateway. | |||
Printer Name | Displays the printer name. | |||
Short Printer Name | Displays the short printer name. | |||
NIC Program Version | Displays the network firmware version. | |||
Web Remote Version | Displays the web page version. | |||
Wired(LAN1) Information | Wired(LAN1) | Displays the state (enabled/disabled) of the standard wired LAN1. | ||
IPv4 Address | Displays the IP address of the wired network. | |||
Subnet Mask | Displays the subnet mask. | |||
Gateway Address | Displays the gateway address when [Enabling Default Gateway] is set to [Wired(LAN1)]. | |||
MAC Address | Displays the MAC address of the wired network. | |||
IPv6 Address (Local) | Displays the IPv6 address (local). | |||
IPv6 Address (Stateless Address) | Displays the IPv6 address (stateless). | |||
IPv6 Address (Stateful Address) | Displays the IPv6 address (stateful). | |||
Wireless(Infrastructure) Information * Displayed when the wireless LAN module (optional) is installed. | Firmware Version | Displays the wireless network firmware version. | ||
Wireless(Infrastructure) | Displays the state (enabled or disabled) of the wireless network (infrastructure). | |||
SSID | Displays the SSID of the connected wireless network access point. | |||
Security | Displays the security type of the wireless network connection. | |||
State | Displays the connection status of the wireless network. | |||
Band | Displays the frequency bands of the current wireless network. | |||
Channel | Displays the channel number used by the wireless network. | |||
RSSI | Displays the signal strength of the wireless network. | |||
IPv4 Address | Displays the IP address of the wireless network I/F. | |||
Subnet Mask | Displays the subnet mask. | |||
Gateway Address | When the [Enabling Default Gateway] is set to [Wireless(Infrastructure)], the gateway address is displayed. | |||
MAC Address | Displays the MAC address of the wireless network. | |||
IPv6 Address (Local) | Displays the IPv6 address (local). | |||
IPv6 Address (Stateless Address) | Displays the IPv6 address (stateless). | |||
IPv6 Address (Stateful Address) | Displays the IPv6 address (stateful). | |||
Wireless(AP Mode) Information * Displayed when the wireless LAN module (optional) is installed. | Wireless (AP mode) | Displays the state (enabled or disabled) of the wireless network (AP mode). | ||
SSID | Displays the SSID of this machine. | |||
Password | Displays the password. | |||
Number of connected | Displays the number of wireless terminals which are currently connected. | |||
IPv4 Address | Displays the IP address. | |||
System | Serial Number | Indicates the serial number of the printer. | ||
Asset Number | Indicates the asset number of the printer. | |||
Lot Number | Indicates the lot number of the printer. | |||
Firmware Version | Indicates the version of firmware. | |||
CU Version | Indicates the firmware version of the Control Unit (CU). | |||
PU Version | Indicates the firmware version of the Print Unit (PU). | |||
Panel Version | Indicates the firmware version of the operator panel. | |||
RAM | Indicates the total capacity of all RAM installed in this machine. | |||
Flash Memory | Indicates the total value capacity of all flash memories installed in this machine. | |||
Date and Time | Displays the current date and time. |
Print Information
Item | Description |
---|---|
Configuration (Fn100) | Prints the configurations of the printer. |
Network (Fn101) | Prints the setup situation of the network. |
File List | Prints a list of files stored in the printer. |
PS Font List | Prints the PS font sample. |
PCL Font List | Prints the PCL font sample. |
IBM PPR Font List | Prints the IBM PPR font sample. |
EPSON FX Font List | Prints the EPSON FX font sample. |
Usage Report (Fn102) | Prints the collective usage report of the printer. |
Supplies Report | Prints the information such as the remaining service life of consumables. |
Error Log (Fn103) | Prints the error log. |
Color Profile List | Prints the list of color profiles registered in the printer. |
Job Log | Prints the history of print data. Displayed when [Admin Setup] - [Others Setup] - [Job Log Setup] - [Save Job Log] is set to [Enable]. |
CMYK TEST1 | Performs test print of each color with paper fed from the MP tray. |
Item | Description | |
---|---|---|
Shared Print (Fn1) | ---Print All--- | Displayed when the shared print data is available. Prints all shared print data. |
---Delete All--- | Displayed when the shared print data is available. Deletes all shared print data. | |
(Displays a list of target files) | Displayed when the shared print data is available. Select a file, input the password, and start printing. | |
Private Print (Fn2) | Please select a User | Selects a user. |
Enter Password | Input the password for the selected user. | |
Search all the Private Jobs? | Selects whether to search for print data of all users or personal print data (of the logged-in user). | |
---Print All--- | Prints all confidential print data. | |
---Delete All--- | Deletes all confidential print data. | |
(Displays a list of target files) | Displayed when the confidential print data is available. Select a file, input the password, and start printing. |
Menus
Item | Factory default settings | Description | |||
---|---|---|---|---|---|
Tray Configuration | MPTray Config | Paper Size (Fn90) | A4 or Letter *1 | Sets the size of the paper you want to print on from the MP tray. | |
X Dimension (Fn91) | 210 millimeter or 8.5 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from the MP tray. | |||
Y Dimension (Fn92) | 297 millimeter or 11.0 inch *2 | Sets the paper length when you have selected a custom size for the paper that you want to print on from the MP tray. | |||
Media Type (Fn93) | Plain | Sets the type of paper that you want to print on from the MP tray. | |||
Media Weight (Fn94) | Light | Sets the weight of the paper that you want to print on from the MP tray. | |||
Tray Usage (Fn95) | When Mismatching | Sets how to use the MP tray. The available values are as follows. [Normal Tray]: Treats the MP tray as a normal tray like Tray 1 or Trays 2-4 (optional). [When Mismatching]: Prints from the MP tray with the correct paper loaded when the paper loaded in the specified tray for printing is different from the paper size of the print data. [Do Not Use]: Ignores the MP tray in selecting or switching the tray automatically. | |||
Tray1 Config | Paper Size (Fn10) | A4 or Letter *1 | Sets the size of the paper you want to print on from Tray 1. | ||
X Dimension (Fn11) | 210 millimeter or 8.5 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from Tray 1. | |||
Y Dimension (Fn12) | 297 millimeter or 11.0 inch *2 | Sets the paper length when you have selected a custom size for the paper that you want to print on from Tray 1. | |||
Media Type (Fn13) | Plain | Sets the type of the paper you want to print on from Tray 1. | |||
Media Weight (Fn14) | Light | Sets the weight of the paper you want to print on from Tray 1. | |||
Tray2 Config | Paper Size (Fn20) | Cassette Size | Sets the size of the paper you want to print on from Tray 2. For [Cassette Size], follows the settings of the paper size dial of the paper tray. | ||
X Dimension (Fn21) | 210 millimeter or 8.5 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from Tray 2. | |||
Y Dimension (Fn22) | 297 millimeter or 11.0 inch *2 | Sets the paper length when you have selected a custom size for the paper that you want to print on from Tray 2. | |||
Media Type (Fn23) | Plain | Sets the type of the paper you want to print on from Tray 2. | |||
Media Weight (Fn24) | Light | Sets the weight of the paper you want to print on from Tray 2. | |||
Other Size | A5 [LEF] | Specifies the paper size when the paper size dial of Tray 2 is set to [OTHER]. | |||
Tray3 Config | Paper Size (Fn30) | Cassette Size | Sets the size of the paper you want to print on from Tray 3. For [Cassette Size], follows the settings of the paper size dial of the paper tray. | ||
X Dimension (Fn31) | 210 millimeter or 8.5 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from Tray 3. | |||
Y Dimension (Fn32) | 297 millimeter or 11.0 inch *2 | Sets the paper length when you have selected a custom size for the paper that you want to print on from Tray 3. | |||
Media Type (Fn33) | Plain | Sets the type of the paper you want to print on from Tray 3. | |||
Media Weight (Fn34) | Light | Sets the weight of the paper you want to print on from Tray 3. | |||
Other Size | A5 [LEF] | Specifies the paper size when the paper size dial of Tray 3 is set to [OTHER]. | |||
Tray4 Config | Paper Size (Fn40) | Cassette Size | Sets the size of the paper you want to print on from Tray 4. For [Cassette Size], follows the settings of the paper size dial of the paper tray. | ||
X Dimension (Fn41) | 210 millimeter or 8.5 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from Tray 4. | |||
Y Dimension (Fn42) | 297 millimeter or 11.0 inch *2 | Sets the paper length when you have selected a custom size for the paper that you want to print on from Tray 4. | |||
Media Type (Fn43) | Plain | Sets the type of the paper you want to print on from Tray 4. | |||
Media Weight (Fn44) | Light | Sets the weight of the paper you want to print on from Tray 4. | |||
Other Size | A5 [LEF] | Specifies the paper size when the paper size dial of Tray 4 is set to [OTHER]. | |||
Paper Feed (Fn80) | Tray1 | Specifies the paper feeding tray. The settings of the printer driver take priority. | |||
Auto Tray Switch | On | Sets whether or not to use the auto tray switch function. The settings of the printer driver take priority. | |||
Tray Sequence | Down | Specifies the selection order of the tray when the auto tray selection or auto tray switching function is used. | |||
Duplex Last Page | Skip Blank Page | Sets whether or not to print the last 1-sided page when the duplex printing is done on odd-numbered pages. | |||
System Adjust | Power Save Time (Fn200) | 1minute | Sets the time that will elapse before the power save mode is entered. Value range: 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes | ||
Sleep Time (Fn200) | 15minutes | Sets the time that will elapse before the sleep mode is switched from the power save mode. Value range: 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes | |||
Auto Power Off Time (Fn202) | 4hours | Sets the time that will elapse before the power is turned off automatically after the standby mode is entered. Value range: 1 hour, 2 hours, 3 hours, 4 hours, 8 hours, 12 hours, 18 hours, 24 hours | |||
Silent Mode | On | Specifies the printing preparations when the standby mode is switched from the sleep mode. [On]: Silent due to no preparation for printing. [Off]: The image drum makes a noise as it prepares for printing, facilitating a faster speed for the first printing start time. | |||
Clearable Warning | ONLINE | Sets the timing to clear the recoverable error display. | |||
Auto Continue | Off | Sets whether or not to automatically restore this machine when a memory overflow or tray request occurs. | |||
Manual Timeout | 60 seconds | Sets the waiting time for loading the paper when you print with [Feed paper individually] checked in the printer driver. Value range: Off, 30 seconds, 60 seconds | |||
Timeout Injob | 40 seconds | Sets the time from loss of the data receipt (canceled by PostScript Emulation) until force-printing. Value range: Off, 5 seconds, 10 seconds, 20 seconds, 30 seconds, 40 seconds, 50 seconds, 60 seconds, 90 seconds, 120 seconds, 150 seconds, 180 seconds, 210 seconds, 240 seconds, 270 seconds, 300 Seconds | |||
Timeout Local | 40 seconds | Sets the time to keep each port open after printing. (Except for network) The value range is from 0 to 300 seconds in increments of 5 seconds. | |||
Timeout Network | 90 seconds | Sets the time to keep the network port open after printing. The value range is from 0 to 300 seconds in increments of 5 seconds. | |||
Low Toner | Continue | Sets the action of this machine when [Toner Low] is displayed. This machine goes offline when [Stop] is selected. | |||
Print Mode w/o Color Toner | Alarm | Specifies the action when there is an empty color toner cartridge. [Alarm]: This machine stops without printing the color print data. Replace the empty toner cartridge with a new one. [Cancel]: Cancels color print data automatically. Replace the empty toner cartridge with a new one. | |||
Jam Recovery | On | Sets whether to reprint pages not printed due to a paper jam after the paper jam is cleared. When [Off] is selected, the printing process including pages missed due to the paper jam will be canceled. | |||
Error Report (Fn210) | Off | Sets whether to print an error report when an internal error occurs. | |||
Hex Dump (Fn237) | Execute | Prints the data received from the PC in hexadecimal dump. To exit this mode, turn off the power. | |||
Print Adjust | Print Position Adjust | MPTray (Fn220) | X Adjust | 0.00millimeter | Adjusts the printing position of each tray. • X Adjust: Corrects the position of the entire print image perpendicularly to the paper travel direction. Value range: ±2.00 mm (in increments of 0.25 mm) • Y Adjust: Corrects the position of the entire print image along the paper travel direction. Value range: ±2.00 mm (in increments of 0.25 mm) • Duplex X Adjust: Corrects the position of the entire print image at the right angle to the paper travel direction for printing the face side during duplex printing (when printing the print side of paper fed from the duplex unit). Value range: ±2.00 mm (in increments of 0.25 mm) • Duplex Y Adjust: Corrects the position of the entire print image along the paper travel direction for printing the face side during duplex printing (when printing the print side of paper fed from the duplex unit). Value range: ±2.00 mm (in increments of 0.25 mm) Tray 2/3/4 is displayed when the expansion tray is mounted. |
Y Adjust | 0.00millimeter | ||||
Duplex X Adjust | 0.00millimeter | ||||
Duplex Y Adjust | 0.00millimeter | ||||
Tray1 (Fn221) | X Adjust | 0.00millimeter | |||
Y Adjust | 0.00millimeter | ||||
Duplex X Adjust | 0.00millimeter | ||||
Duplex Y Adjust | 0.00millimeter | ||||
Tray2 (Fn222) | X Adjust | 0.00millimeter | |||
Y Adjust | 0.00millimeter | ||||
Duplex X Adjust | 0.00millimeter | ||||
Duplex Y Adjust | 0.00millimeter | ||||
Tray3 (Fn223) | X Adjust | 0.00millimeter | |||
Y Adjust | 0.00millimeter | ||||
Duplex X Adjust | 0.00millimeter | ||||
Duplex Y Adjust | 0.00millimeter | ||||
Tray4 (Fn224) | X Adjust | 0.00millimeter | |||
Y Adjust | 0.00millimeter | ||||
Duplex X Adjust | 0.00millimeter | ||||
Duplex Y Adjust | 0.00millimeter | ||||
Paper Black Setting (Fn230) | 0 | Used for fine adjustment in case of noticeable blur etc. in the print results during mono printing when [Plain] is selected as [Media Type]. Decreases the value if printing such as scattered or snow-covered printing occurs in high-density printing. Increases the value if printing is blurred. Adjusts within the range of ±2. | |||
Paper Color Setting (Fn231) | 0 | Used for fine adjustment in case of noticeable blur etc. in the print results during color printing when [Plain] is selected as [Media Type]. Decreases the value if printing such as scattered or snow-covered printing occurs in high-density printing. Increases the value if printing is blurred. Adjusts within the range of ±2. | |||
Trans. Black Setting (Fn232) | 0 | Used for fine adjustment in case of noticeable blur etc. in the print results during mono printing when [Transparency] is selected as [Media Type]. Decreases the value if printing such as scattered or snow-covered printing occurs in high-density printing. Increases the value if printing is blurred. Adjusts within the range of ±2. | |||
Trans. Color Setting (Fn233) | 0 | Used for fine adjustment in case of noticeable blur etc. in the print results during color printing when [Transparency] is selected as [Media Type]. Decreases the value if printing such as scattered or snow-covered printing occurs in high-density printing. Increases the value if printing is blurred. Adjusts within the range of ±2. | |||
SMR Setting (Fn234) | Cyan | 0 | Corrects printing variations for each color due to differences in the temperature and humidity environment, and the printing density/printing frequency. Changes the value if there is burr in the image. Adjusts within the range of ±3. | ||
Magenta | 0 | ||||
Yellow | 0 | ||||
Black | 0 | ||||
BG Setting (Fn235) | Cyan | 0 | Corrects printing variations for each color due to differences in the temperature and humidity environment, and the printing density/printing frequency. Change the value if the underlay is dark. Adjusts within the range of ±3. | ||
Magenta | 0 | ||||
Yellow | 0 | ||||
Black | 0 | ||||
HU Setting | Off | Sets the mode to remove the dirt due to leaving this machine idle for a long period of time. | |||
VL Cleaning | Execute | Improves the printing result when there are white streaks in the vertical direction. | |||
Gloss Mode | Off | A mode used to print with an increased fixing temperature and improved gloss. Please select [On] when you want to print more glossy. | |||
Drum Cleaning (Fn236) | Off | Sets to empty the drum before printing when white streaks appear in the horizontal direction. When [On] is set, the remaining service life of the image drum will be shortened. | |||
High Humid Mode | Off | The paper may curl when the paper is ejected at a high humidity. Set this setting to [Mode1] or [Mode2] to reduce the curling effect. | |||
Office Document Mode | Mode1 | In the case of Mode 1, toner is saved according to the setting of [Admin Setup] - [Print Setup] - [Toner Save] - [Toner Save Level]. In the case of Mode 2, if [Toner Save Level] is set to [Off], toner is saved by 5%. When [Toner Save Level] is set to [Low], [Middle] or [High], toner is saved according to the settings. | |||
Moisture Control | Off | Enables/Disables the moisture control. | |||
Narrow Paper Speed | Mode1 | Sets the printing speed when narrow paper is used. Mode1: Mode3: | |||
Quiet Mode | Off | Sets the quiet print mode to reduce the noise during printing. The print speed becomes lower when [On] is set. | |||
Ultra Light Paper Care Mode | Off | If the following phenomena occur when you are printing with [Media Weight] set to [Ultra Light] or [Light], setting it to [On] may improve the situation. But, the printing speed becomes lower.
| |||
Low Coverage Mode | Off | When used in a hot and humid environment, setting this when vertical band or vertical streaks-like blur appear on the edges of the paper may improve the print result. | |||
Low Temp. Mode | Off | Set to idle the drum and belt so that they operate stably when color registration is noticeable in a low temperature environment. |
*1 Factory default setting values are different according to the country or region.
*2 The values are displayed with the unit set in [Admin Setup] - [Tray Setup] - [Unit of Measurement].
Easy Setup
Item | Factory default settings | Description | |||
---|---|---|---|---|---|
Enter Password | ********** | Input the password to enter the Easy Setup menu. | |||
Language Setup | Select Language | English | Selects the display language of the display. | ||
Time Setup | Date Format | yyyy/mm/dd | Sets the date in the format of yyyy/mm/dd. | ||
Time Zone | +9:00 | Sets the GMT time zone. Value range: -12:00 to +13:00 (in increments of 15 minutes) | |||
Daylight Saving | Off | Sets the daylight saving (daylight saving time). | |||
Setting method | Manual Setup | Selects how to set the time. | |||
SNTP Server (Primary) | (Blank) | Sets the SNTP server used to set the current date and time. Up to 64 characters can be used. Displayed when [Auto Config] is selected as the setting method. | |||
SNTP Server (Secondary) | (Blank) | ||||
Time Setting | 2001/01/01 | The time is set at factory delivery. Change the date and time if necessary. Displayed when [Manual Setup] is selected as the setting method. | |||
Admin Password | New Password | Input a new admin password. | |||
Verify Password | Input the new admin password again to verify. | ||||
Network Setup | General Setup | Extended Network | Disable | Selected when you want to enable any other network than the standard wired LAN. | |
Enabling Default Gateway | Wired(LAN1) | Specifies the network connection method for segment-based communication. | |||
TCP/IP | Enable | Enables/Disables the wired LAN. | |||
NetBIOS over TCP | Enable | Enables/Disables the NetBIOS over TCP protocol. | |||
Web | Enable | Enables the access from the web browser. | |||
Telnet | Disable | Enables the access using Telnet. | |||
FTP | Disable | Enables the access via FTP. | |||
IPSec | Disable | Displayed only when IPSec is enabled. It can be changed to Disable only. | |||
SNMP | Enable | Enables the access from SNMP. | |||
Network Scale | Small | Normally, [Small] is selected. | |||
Network Factory Defaults | Execute | Restores network menu settings to factory default settings. | |||
Wired(LAN1) Setup | Wired(LAN1) | Enable | Enables/Disables the wired LAN1. | ||
IP Address Set | Auto | Set to obtain the IPv4 address automatically or input it manually. | |||
IPv4 Address | xxx.xxx.xxx.xxx | Input the IPv4 address manually. Displayed when [IP Address Set] is set to [Manual]. | |||
Subnet Mask | xxx.xxx.xxx.xxx | Input the subnet mask. Displayed when [IP Address Set] is set to [Manual]. | |||
Gateway Address | xxx.xxx.xxx.xxx | Input the gateway address. Displayed when [IP Address Set] is set to [Manual]. | |||
DHCPv6 | Disable | Set to obtain the IPv6 address automatically. Set to [Disable] when you do not use the IPv6 address. | |||
HUB Link Setting | Auto Negotiate | Sets the connection method to the hub. | |||
System Adjust | Power Save Time (Fn200) | 1minute | Sets the time that will elapse before the power save mode is entered. Value range: 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes | ||
Sleep Time (Fn200) | 15minute | Sets the time that will elapse before the sleep mode is switched from the power save mode. Value range: 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes | |||
Auto Power Off Time (Fn202) | 4hours | Sets the time that will elapse before the power is turned off automatically after the standby mode is entered. Value range: 1 hour, 2 hours, 3 hours, 4 hours, 8 hours, 12 hours, 18 hours, 24 hours | |||
Silent Mode | On | Specifies the printing preparations when the standby mode is switched from the sleep mode. [On]: Silent due to no preparation for printing. [Off]: The image drum makes a noise as it prepares for printing, facilitating a faster speed for the first printing start time. | |||
Clearable Warning | ONLINE | Sets the timing to clear the recoverable error display. | |||
Auto Continue | Off | Sets whether or not to automatically restore this machine when a memory overflow or tray request occurs. | |||
Manual Timeout | 60seconds | Sets the waiting time for loading the paper when you print with [Feed paper individually] checked in the printer driver. | |||
Timeout Injob | 40seconds | Sets the time from loss of the data receipt (canceled by PostScript Emulation) until force-printing. | |||
Timeout Local | 40seconds | Sets the time to keep each port open after printing. (Except for network) The value range is from 0 to 300 seconds in increments of 5 seconds. | |||
Timeout Network | 90seconds | Sets the time to keep the network port open after printing. The value range is from 0 to 300 seconds in increments of 5 seconds. | |||
Low Toner | Continue | Sets the action of this machine when "Toner Low" is displayed. This machine goes offline when [Stop] is selected. | |||
Print Mode w/o Color Toner | Alarm | Specifies the action when there is an empty color toner cartridge. [Alarm]: This machine stops without printing the color print data. Replace the empty toner cartridge with a new one. [Cancel]: Cancels color print data automatically. Replace the empty toner cartridge with a new one. | |||
Jam Recovery | On | Sets whether to reprint pages not printed due to a paper jam after the paper jam is cleared. When [Off] is selected, the printing process including pages missed due to the paper jam will be canceled. | |||
Error Report (Fn210) | Off | Sets whether to print an error report when an internal error occurs. | |||
Hex Dump (Fn237) | Execute | Prints the data received from the PC in hexadecimal dump. To exit this mode, turn off the power. | |||
Tray Configuration | MPTray Config | Paper Size (Fn90) | A4 or Letter *1 | Sets the size of the paper you want to print on from the MP tray. | |
X Dimension (Fn91) | 210 millimeter or 8.5 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from the MP tray. | |||
Y Dimension (Fn92) | 297 millimeter or 11.0 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from the MP tray. | |||
Media Type (Fn93) | Plain | Sets the type of paper that you want to print on from the MP tray. | |||
Media Weight (Fn94) | Light | Sets the weight of the paper that you want to print on from the MP tray. | |||
Tray Usage (Fn95) | When Mismatching | Sets how to use the MP tray. The available values are as follows. [Normal Tray]: Treats the MP tray as a normal tray like Tray 1 or Trays 2-4 (optional). [When Mismatching]: Prints from the MP tray with the correct paper loaded when the paper loaded in the specified tray for printing is different from the paper size of the print data. [Do Not Use]: Ignores the MP tray in selecting or switching the tray automatically. | |||
Tray1 Config | Paper Size (Fn10) | A4 or Letter *1 | Sets the size of the paper you want to print on from Tray 1. | ||
X Dimension (Fn11) | 210 millimeter or 8.5 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from Tray 1. | |||
Y Dimension (Fn12) | 297 millimeter or 11.0 inch *2 | Sets the paper length when you have selected a custom size for the paper that you want to print on from Tray 1. | |||
Media Type (Fn13) | Plain | Sets the type of the paper you want to print on from Tray 1. | |||
Media Weight (Fn14) | Light | Sets the weight of the paper you want to print on from Tray 1. | |||
Tray2 Config | Paper Size (Fn20) | Cassette Size | Sets the size of the paper you want to print on from Tray 2. For [Cassette Size], follows the settings of the paper size dial of the paper tray. | ||
X Dimension (Fn21) | 210 millimeter or 8.5 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from Tray 2. | |||
Y Dimension (Fn22) | 297 millimeter or 11.0 inch *2 | Sets the paper length when you have selected a custom size for the paper that you want to print on from Tray 2. | |||
Media Type (Fn23) | Plain | Sets the type of the paper you want to print on from Tray 2. | |||
Media Weight (Fn24) | Light | Sets the weight of the paper you want to print on from Tray 2. | |||
Other Size | A5 [LEF] | Specifies the paper size when the paper size dial of Tray 2 is set to [OTHER]. | |||
Tray3 Config | Paper Size (Fn30) | Cassette Size | Sets the size of the paper you want to print on from Tray 3. For [Cassette Size], follows the settings of the paper size dial of the paper tray. | ||
X Dimension (Fn31) | 210 millimeter or 8.5 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from Tray 3. | |||
Y Dimension (Fn32) | 297 millimeter or 11.0 inch *2 | Sets the paper length when you have selected a custom size for the paper that you want to print on from Tray 3. | |||
Media Type (Fn33) | Plain | Sets the type of the paper you want to print on from Tray 3. | |||
Media Weight (Fn34) | Light | Sets the weight of the paper you want to print on from Tray 3. | |||
Other Size | A5 [LEF] | Specifies the paper size when the paper size dial of Tray 3 is set to [OTHER]. | |||
Tray4 Config | Paper Size (Fn40) | Cassette Size | Sets the size of the paper you want to print on from Tray 4. For [Cassette Size], follows the settings of the paper size dial of the paper tray. | ||
X Dimension (Fn41) | 210 millimeter or 8.5 inch *2 | Sets the paper width when you have selected a custom size for the paper that you want to print on from Tray 4. | |||
Y Dimension (Fn42) | 297 millimeter or 11.0 inch *2 | Sets the paper length when you have selected a custom size for the paper that you want to print on from Tray 4. | |||
Media Type (Fn43) | Plain | Sets the type of the paper you want to print on from Tray 4. | |||
Media Weight (Fn44) | Light | Sets the weight of the paper you want to print on from Tray 4. | |||
Other Size | A5 [LEF] | Specifies the paper size when the paper size dial of Tray 4 is set to [OTHER]. | |||
Paper Feed (Fn80) | Tray1 | Specifies the paper feeding tray. | |||
Auto Tray Switch | On | Sets whether or not to use the auto tray switch function. The settings of the printer driver take priority. | |||
Tray Sequence | Down | Specifies the selection order of the tray when the auto tray selection or auto tray switching function is used. | |||
Duplex Last Page | Skip Blank Page | Sets whether or not to print the last 1-sided page when the duplex printing is done on odd-numbered pages. | |||
Wireless(Infrastructure) Setting | Wireless(Infrastructure) | Disable | Switches the state (enabled or disabled) of the wireless(Infrastructure). | ||
Network Setting | IP Address Set | Auto | Set to obtain the IPv4 address automatically or set it manually. | ||
IPv4 Address | 192.168.101.100 | Input the IPv4 address manually. Displayed when [IP Address Set] is set to [Manual]. | |||
Subnet Mask | 255.255.255.0 | Input the subnet mask. Displayed when [IP Address Set] is set to [Manual]. | |||
Gateway Address | 0.0.0.0 | Input the gateway address. Displayed when [IP Address Set] is set to [Manual]. | |||
DHCPv6 | Disable | Set to obtain the IPv6 address automatically. Set to Disable when you do not use the IPv6 address. | |||
Automatic setup (WPS) | WPS-PBC | Executed when setting is done by pressing the WPS button of the wireless LAN access point. | |||
WPS-PIN | Executed when the PIN code displayed on this machine is registered with the wireless LAN access point. | ||||
Wireless Network Selection | xxxxxx ...... | Displays a list of wireless LAN access point names found by the search. | |||
Manual Setup | SSID | Input the SSID. | |||
Security | Disable | Sets the security of the wireless LAN function. | |||
WEP Key | Input the WEP key. | ||||
WPA Encryption Type | Displays the WPA-PSK encryption type. The setting is carried out automatically according to the security settings. (Impossible to switch in this menu) | ||||
WPA Pre-shared Key | Input the pre-shared key. Displayed when [Security] is set to any other value than [Disable] or [WEP]. | ||||
Execute | Executes the changes to security settings. | ||||
Wireless Reconnection | Reconnects to the wireless LAN (infrastructure). |
*1 Factory default setting values are different according to the country or region.
*2 The values are displayed with the unit set in [Admin Setup] - [Tray Setup] - [Unit of Measurement].
Admin Setup
Item | Factory default settings | Description | |||
---|---|---|---|---|---|
Enter Password | ********** | Input the password required to enter the Admin Setup menu. | |||
Network Setup | General Setup | Extended Network | Disable | Selected when you want to enable any other network than the standard wired LAN. | |
Enabling Default Gateway | Wired(LAN1) | Specify the network connection method for segment-based communication. | |||
TCP/IP | Enable | Enables/Disables the wired LAN. | |||
NetBIOS over TCP | Enable | Enables/Disables the NetBIOS over TCP protocol. | |||
Web | Enable | Enables the access from the web browser. Displayed when the TCP/IP protocol is enabled. | |||
Telnet | Disable | Enables the access using Telnet. Displayed when the TCP/IP protocol is enabled. | |||
FTP | Disable | Enables the access via FTP. Displayed when the TCP/IP protocol is enabled. | |||
IPSec | Disable | Displayed only when IPSec is enabled. It can be changed to Disable only. Displayed when the TCP/IP protocol is enabled. | |||
SNMP | Enable | Enables the access from SNMP. Displayed when the TCP/IP protocol is enabled. | |||
Network Scale | Small | Normally, [Small] is selected. | |||
Network Factory Defaults | Execute | Restores network menu settings to factory default settings. | |||
Wired(LAN1) Setup | Wired(LAN1) | Enable | Enables/Disables the wired LAN1. | ||
IP Address Set | Auto | Set to obtain the IPv4 address automatically or input it manually. | |||
IPv4 Address | xxx.xxx.xxx.xxx | Input the IPv4 address manually. Displayed when [IP Address Set] is set to [Manual]. | |||
Subnet Mask | xxx.xxx.xxx.xxx | Input the subnet mask. Displayed when [IP Address Set] is set to [Manual]. | |||
Gateway Address | xxx.xxx.xxx.xxx | Input the gateway address. Displayed when [IP Address Set] is set to [Manual]. | |||
DHCPv6 | Disable | Set to obtain the IPv6 address automatically. Set to [Disable] when you do not use the IPv6 address. | |||
HUB Link Setting | Auto Negotiate | Sets the connection method to the hub. | |||
USB Setup | USB | Enable | Enables/Disables the USB interface. | ||
Speed | 480 Mbps | Sets the maximum baud rate using a USB interface. | |||
Soft Reset | Disable | Enables/Disables the soft reset command. | |||
Serial Number | Enable | Enables/Disables the USB serial number. The USB serial number is used to identify the USB device connected to the PC. | |||
Offline Receive | Disable | When [Enable] is selected, data can be received even if the printer is offline. | |||
USB Memory Interface | Enable | Enables/Disables the USB memory interface. | |||
Connected Host | Normal | Set to [Specific] in case of timeout when printing is done on this machine which is in the sleep mode. Power consumption in the sleep mode is higher than the state where it is set to [Normal]. | |||
Print Setup | Personality | Auto | Selects the operating language of the printer. | ||
Copies | 1 | Sets the number of copies. The value set in the printer driver takes priority. | |||
Duplex | On or Off *1 | Sets whether or not to implement duplex printing. The value set in the printer driver takes priority. | |||
Binding | Long Edge | Specifies the binding method for duplex printing. The value set in the printer driver takes priority. | |||
Media Check | Enable | Sets whether to check the mismatch between the paper size of the print data and that of the tray. | |||
A4/Letter Override | Yes | Sets the functions of auto switching the printing paper from A4 to Letter when A4 paper runs out and Letter paper is loaded, or from Letter to A4 when Letter paper runs out. | |||
Resolution | 600 dpi | Sets the resolution. The value set in the printer driver takes priority. | |||
Toner Save | Toner Save Level | Off | Sets the toner save level. | ||
Color | All | Specifies whether to apply toner save to 100% black. | |||
Mono-Print Mode | Auto | Sets the print mode of mono pages. [Auto] controls the print mode with a good balance. [Color Mode] is suitable for printing a large amount of color pages. [Normal Mode] is suitable for printing a large amount of mono pages. | |||
Color Ready Mode | Off | Sets whether or not to prepare for the next color printing after the printing has completed. | |||
Default Orientation | Portrait | Specifies the print orientation. For PostScript Emulation, this setting is disabled. | |||
Edit Size | Cassette Size | Sets the size of the drawing area when the size is not specified by the paper size edit command from a PC. | |||
Trapping | Off | Set when white streaks appear between adjacent colors. | |||
X Dimension | 210 millimeter | Sets the default value of paper width for custom paper sizes. | |||
Y Dimension | 297 millimeter | Sets the default value of paper length for custom paper sizes. | |||
PS Setup | L1 Tray | Type1 | Sets the tray selection number of PostScript level-1 operator commands. | ||
Network Protocol | RAW | Specifies the PS communication protocol for network connection. | |||
USB Protocol | RAW | Specifies the PS communication protocol for USB connection. | |||
PDF Paper Size | Current Tray Size | Specifies the paper size for direct printing of PDF files. | |||
PDF Scaling Size | 99% | Set the reduction ratio when [Scaling Size] is selected in [PDF Paper Size]. | |||
PDF Print Mode | Quality priority | Sets whether to prioritize print quality or print speed when a PDF is printed. | |||
PCL Setup | Font Source | Resident2 | Selects the location of the font to be used. | ||
Font Number | C1 | Selects the number of the font to be used. Value range: I0 to I90 when [Resident] is set; or C1 to C4 when [Resident2] is set | |||
Font Pitch | 10.00 CPI | Sets the PCL font width. Value range: 0.44 to 99.99 CPI (in increments of 0.01 CPI) | |||
Font Height | 12.00 points | Sets the PCL font height. Value range: 4.00 to 999.75 points (in increments of 0.25 points) | |||
Symbol Set | WIN3.1J | Selects the symbol set of PCL. | |||
A4 Print Width | 78 column | Sets the number of columns until an auto carriage return on A4 paper. | |||
White Page Skip | Off | Selects whether or not to print blank pages. | |||
CR Function | CR | Sets the operation of this machine when receiving a CR code. | |||
LF Function | LF | Sets the operation of this machine when receiving an LF code. | |||
Print Margin | Normal | Sets the unprintable area of the paper. | |||
True Black | Off | Sets whether to use composite black (CMYK mixed color) or pure black (K only) for the black color (100%) of image data. | |||
Pen Width Adjust | On | Sets whether to emphasize fine lines and make them thicker. | |||
Tray ID# | MPTray | 4 | Sets the value to specify the tray with the output specification command of PCL. Value range: 1 - 59 | ||
Tray1 | 1 | ||||
Tray2 | 5 | ||||
Tray3 | 20 | ||||
Tray4 | 21 | ||||
SIDM Setup | SIDM Manual ID# | 2 | Sets up Pn specified in MANUAL by MANUAL-1 ID No.FX/PPR Emu in CSF control command (ESC EM Pn). | ||
SIDM Manual2 ID# | 3 | Sets up Pn specified in MANUAL by MANUAL-2 ID No.FX/PPR Emu in CSF control command (ESC EM Pn). | |||
SIDM MP Tray ID# | 4 | Sets up Pn specified TRAYO (MP Tray) by MP Tray ID No.FX/PPR Emu in CSF control command (ESC EM Pn). | |||
SIDM Tray1 ID# | 1 | Sets up Pn specified TRAY 1 by Tray 1 ID No.FX/ PPR Emu in CSF control command (ESC EM Pn). | |||
SIDM Tray2 ID# | 5 | Sets up Pn specified TRAY 2 by Tray 2 ID No.FX/ PPR Emu in CSF control command (ESC EM Pn). | |||
SIDM Tray3 ID# | 6 | Sets up Pn specified TRAY 3 by Tray 3 ID No.FX/ PPR Emu in CSF control command (ESC EM Pn). | |||
SIDM Tray4 ID# | 7 | Sets up Pn specified TRAY 4 by Tray 4 ID No.FX/ PPR Emu in CSF control command (ESC EM Pn). | |||
IBM PPR Setup | Character Pitch | 10 CPI | Specifies character pitches in IBM PPR emulation. | ||
Font Condense | 12 CPI to 20 CPI | Specifies 12CPI pitches for Condense Mode. | |||
Character Set | SET-2 | Specifies a character set. | |||
Symbol Set | IBM-437 | Specifies a symbol set. | |||
Letter O Style | Disable | Specifies the style that replaces 9BH with letter o and 9DH with a zero. | |||
Zero Character | Normal | Sets the zero to be slashed or unslashed. | |||
Line Pitch | 6 LPI | Specifies the line spacing. | |||
White Page Skip | Off | Selects whether to print blank pages. | |||
CR Function | CR | Selects a carriage return from [CR] or [CR+LF]. | |||
LF Function | LF | Selects a line feed from [LF] or [LF+CR]. | |||
Line Length | 80 Column | Specifies the number of characters per line. | |||
Form Length | 11.7 inch or 11 inch *1 | Specifies the length of paper. | |||
TOF Position | 0.0 inch | Specifies the distance from the top edge of paper. | |||
Left Margin | 0.0 inch | Specifies the distance from the left edge of paper so that the print starting point shifts to the right horizontally. | |||
Fit to Letter | Disable or Enable *1 | Sets the printing mode that can fit paper to the printable area equivalent to 11 inches (66 lines). | |||
Text Height | Same | Sets the height of a character. | |||
EPSON FX Setup | Character Pitch | 10 CPI | Specifies character pitch. | ||
Character Set | SET-2 | Specifies a character set. | |||
Symbol Set | IBM-437 | Specifies a symbol set. | |||
Letter O Style | Disable | Specifies the style that replaces 9BH with letter o and 9DH with a zero. | |||
Zero Character | Normal | Sets the zero to be slashed or unslashed. | |||
Line Pitch | 6 LPI | Specifies the line spacing. | |||
White Page Skip | OFF | Selects whether to print blank pages. | |||
CR Function | CR | Select a carriage return from [CR] or [CR+LF]. | |||
Line Length | 80 Column | Specifies the number of characters per line. | |||
Form Length | 11.7 inch or 11 inch *1 | Specifies the length of paper. | |||
TOF Position | 0.0 inch | Specifies the distance from the top edge of paper. | |||
Left Margin | 0.0 inch | Specifies the distance from the left edge of paper so that the print starting point shifts to the right horizontally. | |||
Fit To Letter | Disable or Enable *1 | Sets the printing mode that can fit paper to the printable area equivalent to 11 inches (66 lines). | |||
Text Height | Same | Sets the height of a character. | |||
Private Print Setup | Verify job option | Disable | Specifies whether to verify the print data before printing. If enabled, printing is performed after verifying that the print data has not been changed. The integrity of print data is guaranteed, but the time to start printing will be longer. | ||
Erase job option | No overwrite | Sets the method for erasing the print data. Specifies that the data cannot be overwritten after it has been erased and cannot be restored. If you overwrite, it will take longer to erase. Value range: No overwrite/Zero out once | |||
Keep job for | 2hours | Sets the retention period of the print data. After the print data is saved, if the print data is not printed after the set period, the print data is automatically deleted. Value range: 15 min, 30 min, 1 hour, 2 hours, 4 hours, 8 hours, 12 hours, 1 day, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days | |||
Job Limitation | Enable all print formats | Sets whether to save restricted print data. When [Private Print only] is selected, print data other than private print will not be accepted. | |||
Verify job password | Off | Selects whether or not to verify the password of print data when access control is enabled. | |||
Job Auto Search | On | Selects whether or not to perform print data search at the same time as unlocking the panel when access control is enabled. | |||
Color Setup | Ink Simulation | Off | The printer comes with a built-in process simulation tool that simulates standard printing colors on the printer. | ||
UCR | Low | Adjusts the degree of under color removal. | |||
CMY100% Density | Disable | Selects whether to use halftone for C, M, Y 100% output. | |||
CMYK Conversion | On | Selects whether to perform CMYK conversion in the simple (high speed) mode. | |||
Panel Setup | Near Life Status | Enable | Sets whether to display a message when the supplies or maintenance parts are approaching the end of service life. | ||
Near Life LED | Enable | Sets whether to light the «ATTENTION» lamp when the supplies or maintenance parts are approaching the end of service life. | |||
Idle display | Toner Gauge | Selects the information to be displayed on the standby screen. | |||
Panel Contrast | 0 | Adjusts the contrast of the display. Value range: -10 to +10 | |||
Buzzer Setup | Error Volume | Off | Sets the buzzer volume when an error occurs. | ||
Print Completion Buzzer Volume | Off | Sets the buzzer volume when the printing has completed. | |||
AirPrint Buzzer Volume | Low | Sets the volume of the AirPrint buzzer. | |||
Card Hold Buzzer Volume | Low | Sets the buzzer volume when the IC card is held. Displayed when access control is enabled. | |||
Time Setup | Date Format | yyyy/mm/dd | Sets the date in the format of yyyy/mm/dd. | ||
Time Zone | +9:00 | Sets the GMT time zone. Value range: -12:00 to +13:00 (in increments of 15 minutes) | |||
Daylight Saving | Off | Sets the daylight saving (daylight saving time). | |||
Setting method | Manual Setup | Selects how to set the time. | |||
SNTP Server(Primary) | (Blank) | Sets the SNTP server used to set the current date and time. Up to 64 characters can be used. Displayed when [Auto Setup] is selected as the setting method. | |||
SNTP Server(Secondary) | (Blank) | ||||
Time Setting | 2001/01/01 | The time is set at factory delivery. Change the date and time if necessary. Displayed when [Manual Setup] is selected as the setting method. | |||
Power Setup | Auto Power Off | Auto Config | Sets the operation of Auto Power Off. Auto Setup: Auto Power Off does not work for network (wired/wireless) connection. Enable: Auto Power Off works regardless of the connection method. Disable: Auto Power Off does not work. | ||
Tray Setup | Unit of Measurement | millimeter | Sets the unit of measurement for the custom size (mm/inch). | ||
Default Paper Size | A4 | Sets the default paper size of a custom size. | |||
Others Setup | Paper Feed Roller Counter Clear | MP Tray Clear | Execute | Clears the counter after the paper feed roller of the MP tray is replaced. | |
Tray1 Clear | Execute | Clears the counter after the paper feed roller Tray 1 is replaced. | |||
Tray2 Clear | Execute | Clears the counter after the paper feed roller Tray 2 is replaced. | |||
Tray3 Clear | Execute | Clears the counter after the paper feed roller Tray 3 is replaced. | |||
Tray4 Clear | Execute | Clears the counter after the paper feed roller Tray 4 is replaced. | |||
Flash Memory Setup | Initialize | Execute | Initializes the flash memory. | ||
Format Partition | PCL | Formats the specified partition of a flash memory. | |||
Job Log Setup | Save Job Log | Disable | Sets whether to save a log of print data. | ||
Clear Job Log | Execute | Clears the log of saved print data. Displayed when [Save Job Log] is enabled. | |||
Security Setup | Access Control | Disable | Sets whether to enable access control. | ||
User Counter Report | Execute | Prints a user counter report. Displayed when access control is set to [Enable] and [Save Job Log] is enabled. | |||
Language Setup | Select Language | English | Selects the display language of the display. | ||
Job Cancel Setup | Cancel Key Behavior | Short | Sets the actions when the cancel button is pressed. Short: A short press (for 2 seconds or less) cancels the printing. Long: A long press for 2 to 5 seconds cancels the printing. Off: Pressing the cancel button does not cancel the printing. | ||
Inquiry Display | On | Sets whether to display a screen to confirm whether to cancel the printing. | |||
Focus Position | Yes | Sets whether to select [Yes] or [No] as the initial value on the job cancel inquiry screen. | |||
Display Timeout | 180 | Sets the waiting time in seconds before a button is pressed on the job cancel inquiry screen. When the waiting time has passed, the printing will be continued instead of being canceled. | |||
Near Life Setup | Drum Near Life Timing | 1500 | Sets whether to display the number of copies before the image drum is approaching the end of its service life. Value range: 500 to 5,000 (in increments of 500) | ||
Fuser Near Life Timing | 1500 | Sets whether to display the number of copies before the fuser unit is approaching the end of its service life. Value range: 500 to 5,000 (in increments of 500) | |||
Belt Near Life Timing | 1500 | Sets whether to display the number of copies before the belt unit is approaching the end of its service life. Value range: 500 to 5,000 (in increments of 500) | |||
Erase Privacy Data | Execute | Erases the following data set in this machine. • Admin password, values set in various menus • Various records• Access control registered to this machine, user information | |||
NFC Setup | Enable | Enables/Disables the NFC function. | |||
Settings | Reset Settings | Execute | Resets the menu settings changed by the user to the factory default settings. | ||
Save Settings | Execute | Saves the current menu settings. Menu settings that have been saved previously will be overwritten. | |||
Restore Settings | Execute | Restores settings to the saved menu settings. | |||
Change Password | New Password | - | Input a new admin password. | ||
Verify Password | - | Input the new admin password again to verify. |
*1 Factory default setting values are different according to the country or region.
Print Statistics
Item | Factory default settings | Description | |
---|---|---|---|
Enter Password | **** | Input the password required to enter the Print Statistics menu. The input range is a 4-digit number. The factory default setting is "0000". | |
Usage Report | Enable | Enables/Disables the usage report. | |
Maintenance Counter | Disable | Sets whether or not to add a maintenance report (non-resettable counter and non-resettable consumables replacement times) to [Usage Report]. [Disable]: Prints the resettable counter and resettable consumable replacement counter in [Usage Report]. [Enable]: In addition to resettable counter and resettable consumable replacement counter, the maintenance report (non-resettable counter and non-resettable consumable replacement counter) is also printed together in [Usage Report]. Displayed when [Print Statistics] - [Usage Report] is set to [Enable]. | |
Reset Main Counter | Execute | Resets the main counter. Displayed when [Print Statistics] - [Usage Report] is set to [Enable]. | |
Reset Supplies Counter | Execute | Resets the replacement counter of consumables. Maintenance counter is not reset. Displayed when [Print Statistics] - [Usage Report] is set to [Enable] and [Maintenance Counter] is set to [Enable]. | |
Change Password | New Password | **** | Sets a new password required to enter the Print Statistics menu. The input range is a 4-digit number. Displayed when [Print Statistics] - [Usage Report] is set to [Enable]. |
Verify Password | **** | Input the new password required to enter the Print Statistics menu set in [New Password] again. |
Calibration
Item | Factory default settings | Description | |
---|---|---|---|
Auto Density Mode | Standard | Sets whether to automatically adjust the density/tone for color printing. Or, changes the frequency to adjust the density/tone for color printing. | |
Adjust Density (Fn300) | Execute | Executed when you want to adjust the density immediately. | |
Adjust Registration (Fn301) | Execute | Executed when you want to adjust the registration immediately. | |
Long Paper Adjust | 0 | Adjusts the fixing speed for printing on long paper. Set to a plus value if color shift occurs, or to a minus value if color misregistration occurs. | |
Color Density | Cyan Density (Fn310) | 0 | Sets the print density for each color. Adjusts within the range of ±3. Darkens the print result by adjusting in + direction, or lightens the print result by adjusting in - direction. |
Magenta Density (Fn311) | 0 | ||
Yellow Density (Fn312) | 0 | ||
Black Density (Fn313) | 0 | ||
Print Color Tuning Pattern (Fn302) | Execute | Prints a pattern for density adjustment. | |
Cyan Tuning | Highlight | 0 | Adjusts the density of highlights (light areas), mid-tone and dark tone (dark areas) for each color. Darkens the density by adjusting in the plus direction, and lightens the density by adjusting in the minus direction. Used for fine adjustment that is not possible with the density setting. Adjusts within the range of ±3. |
Mid-Tone | 0 | ||
Dark | 0 | ||
Magenta Tuning | Highlight | 0 | |
Mid-Tone | 0 | ||
Dark | 0 | ||
Yellow Tuning | Highlight | 0 | |
Mid-Tone | 0 | ||
Dark | 0 | ||
Black Tuning | Highlight | 0 | |
Mid-Tone | 0 | ||
Dark | 0 |
AirPrint
Item | Factory default settings | Description |
---|---|---|
AirPrint | Enable | Sets AirPrint to [Enable]. |
Wireless(Infrastructure) Setting
Item | Factory default settings | Description | ||
---|---|---|---|---|
Enter Password | ********** | Input the password required to enter the Admin Setup menu. | ||
Wireless(Infrastructure) | Disable | Enables/Disables the wireless LAN (infrastructure). | ||
Network Setting | IP Address Set | Auto | Set to obtain the IPv4 address automatically or input it manually. | |
IPv4 Address | 192.168.101.100 | Input the IPv4 address manually. Displayed when [IP Address Set] is set to [Manual]. | ||
Subnet Mask | 255.255.255.0 | Input the subnet mask. Displayed when [IP Address Set] is set to [Manual]. | ||
Gateway Address | 0.0.0.0 | Input the gateway address. Displayed when [IP Address Set] is set to [Manual]. | ||
DHCPv6 | Disable | Set to obtain the IPv6 address automatically. Set to disable when you do not use the IPv6 address. | ||
Automatic setup (WPS) | WPS-PBC | Executed when setting is done by pressing the WPS button of the wireless LAN access point. | ||
WPS-PIN | Executed when the PIN code displayed on this machine is registered with the wireless LAN access point. | |||
Wireless Network Selection | xxxxxx ...... | Displays the list of wireless LAN access points detected by this machine. | ||
Manual Setup | SSID | Input the SSID. | ||
Security | Disable | Sets the security of the wireless LAN function. | ||
WEP Key | Input the WEP key. | |||
WPA Encryption Type | Displays the WPA-PSK encryption type. The setting is carried out automatically according to the security settings. (Impossible to switch in this menu) | |||
WPA Pre-shared Key | Input the pre-shared key. Displayed when [Security] is set to any other value than [Disable] or [WEP]. | |||
Execute | Executes the changes to security settings. | |||
Wireless reconnection | Reconnects to the wireless LAN (infrastructure). |
Wireless(AP Mode) Setting
Item | Factory default settings | Description | |
---|---|---|---|
Enter Password | ********** | Input the password required to enter the Admin Setup menu. | |
Wireless(AP mode) | Disable | Enables/Disables wired (AP mode). | |
Automatic Setup (PushButton) | If YES is selected, automatic connection can be started with a push button. If the connection has failed, the system goes back to the home screen. If the connection is successful, [Wireless(AP Mode) connection setting is completed/Close by the setting button] is displayed. | ||
Manual Setup | Displays the SSID and password of this machine for manual setup. | ||
Connection Setting | SSID | OKI-Printer name-Last 6 digits of the MAC address | Inputs a new one to change the SSID. |
Password | Inputs a new one to change the password. | ||
IPv4 Address | 192.168.110.100 | Input the IPv4 address. | |
Execute | Executes connection setup. | ||
AP Mode User Setting | Don't disclose user | Sets whether or not to disclose the AP mode information to users other than the administrator. |
Boot Menu
To display the Boot Menu, do the following.
- Power on this machine while pressing «OK» on the operator panel. When [Boot Menu] appears on the display, release your finger and press «OK» again.
Input the admin password using the numeric keypad, and press «OK».
Item | Factory default settings | Description |
---|---|---|
Enter Password | ********** | Input the password required to enter the Boot Menu. |
Menu Lockout | Off | When [On] is set, the administrator setup menu and user menu list are hidden and thus unavailable. However, only printing settings are displayed. |
Panel Lockout | Off | Disables buttons/keys on the operator panel. [Mode1]: Disables all keys except «ON LINE», «OK», «CANCEL», «POWER SAVE» and «HELP». [Mode2]: Disables keys except «ON LINE», «OK» and «POWER SAVE». [Off]: Do not restrict operations with buttons/keys on the operator panel. |
After AC power supply fails | Always Off | Sets whether to restore the Ready To Print status automatically in case of a power failure. [Always On]: [Always Off]: |