Printing with the NFC function

If your mobile device supports the NFC function, you can print using the NFC function of this machine.

To print using the NFC function, it is necessary to set the wireless LAN (AP mode) of this machine to [Enable].

  • You cannot use wireless LAN (AP mode) while using wireless LAN (Infrastructure).


Enabling wireless LAN (AP mode)

  1. Check that "Ready To Print" appears on the display.

    • If the machine is in the power saving mode, press «OK» to restore.
  2. Press the scroll button ▲ or ▼ several times to select [Wireless(AP Mode) Setting], and then press «OK».

  3. Press ▲ or ▼ to input the admin password, and press «OK».

    Admin Password
  4. Select [Wireless(AP Mode)], and then press «OK».
  5. Select [Enable], and then press «OK».
  6. Press «CANCEL» to return to the standby screen.


Printing with this machine registered with the app
  1. Enable the NFC function of your mobile device, and enable Wi-Fi.

  2. Bring the NFC antenna of the mobile device close to the NFC mark on this machine.
    This machine is registered to the mobile device application. If it has already been registered, only the destination is set.

    • For iOS, it is necessary to display the NFC reading screen on the application in advance.
  3. Select the target you want to print.
  4. Tap [Print].

  • As the position of the NFC antenna differs for each mobile device, please refer to the manual of your mobile device for further details.
  • If the printing has failed, check the Wi-Fi settings of your mobile device, and register this machine with the application again.