Printing by enlargement/reduction

You can print at the magnification rate you want without changing the print data.

  • This function is not available to macOS.
  • This function is not applicable to some applications.

  • If you are using B822, refer to the PCL printer driver section.


For Windows PCL printer driver
  1. Open the file to be printed.
  2. Select [Print] from the [File] menu.
  3. Click [Preferences].

  4. Input the scaling rate for [Scale] on the [Job Options] tab.

    • If [Print Mode] is set to [PCL] and [Scale] is checked, different scales can be specified for portrait and landscape.
    • The scaling function further enlarges/reduces the state specified in [Scale], [Options] (N-UP, Booklet, Poster Print), [Print Position Adjust], and [Bind Margin].
    • To adjust the enlargement/reduction of printing result in the paper feed direction with the scaling function, select [Auto] for [Origin].
  5. Specify other settings as necessary, and click [OK].
  6. Click [Print] in the [Print] screen.


For the Windows PS printer driver
  1. Open the file to be printed.
  2. Select [Print] from the [File] menu.
  3. Click [Preferences].
  4. Input the scaling rate for [Scale] of [Job Type] in the [Job Options] tab.
  5. Specify other settings as necessary, and click [OK].
  6. Click [Print] in the [Print] screen.