An afterimage printed on the front edge of the paper is printed
Cause | Solution | Reference |
|---|---|---|
If A is about 94 mm and an afterimage is printed underneath, the media weight may not be set incorrectly. | Press the scroll buttons on the operator panel several times to select the paper tray you are using from [Menus] - [Tray Configuration], and set an appropriate value for [Media Weight]. Or, change [Media Weight] to a thicker value than the present value. | |
If A is at an interval of about 109 mm or 107 mm and an afterimage is printed, the fuser may be scratched or dirty. | Change the maintenance kit. |
