Printing by correcting fine lines

When the printer driver is installed, the fine line correcting function is enabled to prevent fine lines from becoming faint or inconsistent in thickness.

Depending on the specific application, the spacing of bar codes may become narrower. In that case, disable the function.

  • This function is not available to the macOS PCL printer driver.

  • If you are using B822, refer to the PCL printer driver section.


For Windows PCL printer driver

When this function is enabled, ultra fine lines are slightly thicker.

  1. Open the file to be printed.
  2. Select [Print] from the [File] menu.
  3. Click [Preferences].
  4. Select the [Job Options] tab.
  5. Click [Advanced].
  6. Select [Adjust ultra fine lines] in [Item], set it to [On] in [Settings], and click [OK].
  7. Specify other settings as necessary, and click [OK].
  8. Click [Print] in the [Print] screen.


For Windows PS printer driver

When this function is enabled, the thickness of ultra fine lines is consistent in the specified direction.

When this function is disabled, ultra fine lines may be slightly thicker.

  1. Open the file to be printed.
  2. Select [Print] from the [File] menu.
  3. Click [Preferences].
  4. Select the [Job Options] tab.
  5. Click [Advanced].
  6. Check [Adjust ultra fine lines], and click [OK].
  7. Specify other settings as necessary, and click [OK].
  8. Click [Print] in the [Print] screen.


For macOS PS printer driver
  1. Open the file to be printed.
  2. Select [Print] from the [File] menu.
  3. Select the [Printer Features] panel.
  4. Check [Adjust ultra fine lines].

  5. Specify other settings as necessary, and click [Print].

  • If there is no detail settings displayed in the [Print] screen, click [Show Details] at the bottom of the screen.