Setting the time that elapses before entering the power save mode

This machine automatically enters the power save mode (an energy saving mode) if no operation is done for a certain period of time.

The following time options can be set. The factory default setting is 1 minutes.

1 min, 2 mins, 3 mins, 4 mins, 5 mins, 10 mins, 15 mins, 30 mins, and 60 mins

  • This machine may not enter the power save mode after the set period of time since the fan is working until this machine has cooled down depending on the printing environment or the usage conditions.


  1. Check that "Ready To Print" appears on the display.

    • If the machine is in the power saving mode, press «OK» to restore.
  2. Press the scroll button ▼ on the operator panel several times to select [Menus], and press «OK».

  3. Press ▼ to select [System Adjust], and then press «OK».

  4. Check that [Power Save Time] is selected, and then press «OK».

  5. Press ▲ or ▼ to select the time to be set, and then press «OK». Check that [*] is displayed to the left of the selected setting.

  6. Press «CANCEL» to return to the standby screen.