เครื่องพิมพ์ฉลากสี รุ่น Pro Series

เครื่องพิมพ์ฉลากรุ่น Pro330S


เครื่องพิมพ์ฉลากสีรุ่น Pro330S เป็นเครื่องพิมพ์ฉลากสี LED แบบผงหมึกที่มีขนาดกะทัดรัดที่สุดในโลก (*1) รองรับโซลูชันการพิมพ์ที่เหมาะกับสภาพแวดล้อมที่หลากหลาย ตั้งแต่งานพิมพ์แบบทั่วไป ไปจนถึงงานพิมพ์สำหรับธุรกิจการขายปลีก, การผลิต, จุดบริการการขาย (POS) และจุดบริการตนเอง (KIOSK) ช่วยเพิ่มประสิทธิภาพการโฆษณาที่มีผลต่อการตอบรับจากลูกค้าได้มากยิ่งขึ้น ตลอดจนการเพิ่มความน่าสนใจของงานพิมพ์ด้วยสีสันที่เต็มอิ่มและสว่างสดใสกว่าการพิมพ์แบบความร้อน (Thermal Printing) ขาว-ดำแบบเดิม.

*1 อ้างอิงจากปริมาณเครื่องพิมพ์สีแบบ LED / Laser ที่มีจำหน่ายในท้องตลาด ณ เดือนกันยายน 2022 จากผลการวิจัยของ OKI-J

คุณสมบัติด้านเทคนิค

Pro330S

Printing Method Digital 3 LED Full-color Electrophotographic Printing Method
Media Type Plain Paper, Plain Paper Label, Glossy Paper Label, Film Label
Media Width 25 - 86mm
Media Thickness *1 0.08 - 0.25mm
Media Length 53 - 551mm
Media Detection None
Black Mark (bottom)
Black Mark (top)
Hole
Gap
Media Form *2 *3 Roll-fed
Fan-Fold
Cut Sheet
Roll Outer Diameter Max. Ф203.2mm (Ф8")
Core Inner Diameter Min. Ф50.8mm
Roll Wind Direction Face-out
Total Media Weight Max. 2.4kg
Force of Tugging at Media of Feed Roller 10N or more
Print Width Max. 80mm
Minimum Print Margin Top:2.03mm
Bottom:2.03mm
Right:2.03mm
Left:2.03mm
*** The minimum margin (top, bottom, left, right) that the printer driver can set is 2.1mm.
Print Position Accuracy Vertical : ±1.0mm
Horizontal : ±1.0mm
Cut Accuracy *4 *5 Media length 216mm or under :
±1.5mm
Media length over than 216mm:
±0.7%
Squareness accuracy: 1/100 or under
Straightness accuracy: 1.0mm or under
Cuttable Media Length 53 - 551mm
Print Resolution 1200 x 1200 dpi
600 x 600 dpi
Physical dot pitch: 1200 dpi
Print Speed *6 Max. 152.4mm/s (6ips)
Warm-up Time Approx. 23.0 seconds from power-on
Approx. 28.0 seconds from power save
Time To First Print Approx. 5 seconds (Cold start)
Approx. 4 seconds (Pre heat)
Interface USB 2.0 (High Speed), 100BASE-TX/10BASE-T, (Optional) Wireless LAN (IEEE802.11a/b/g/n)
Protocol TCP/IP
Printer Language PCL 6 (XL) emulation, PCL 5c emulation
Supported OS   หน้าเพจการรองรับระบบปฏิบัติการ (OS) Windows 10, Windows 10 x64, Windows 8.1, Windows 8.1 x64, Windows 8, Windows 8 x64, Windows Server 2016, Windows Server 2012 R2, Windows Server 2012
Memory (Std./Max.) 512 MB / 512 MB
Font PCL emulation 27 scalable fonts, 4 bitmap fonts
Media Sensors Position adjustable Transmission Hole, Gap, Notch Sensor
Position adjustable Reflective Black Mark (bottom) Sensor
Position adjustable Reflective Black Mark (top) Sensor
Paper End Sensor
Auto Cutter Rotary blade Full cut
Presenter Mode Optional
Buzzer Standard
Dimensions(WxDxH) 198 x 380 x 195 mm
Weight(includes supplies) Approx. 9.5 kg
Operating Environment Operating: 10 - 32 °C, 20 - 80 %RH
No condensation
Power Source *7 Single phase 220 - 240 VAC ±10%, 50/60 Hz ±2%
Power Consumption Operating: Max. 650W / Ave. 250W
Idle: 10W
Power Save: < 5.0W
Deep Sleep: < 1.0W
Auto-Off: < 0.5W
Noise Level Operating: Approx. 55 dBA
Idle: < 37 dBA
Safety& Environment Regulation RCM Mark, RCM Mark
Unit Life *8 5 Years or 120 km
Cutter Life 1.0 million cuts
Duty Cycle Recommended: 1,500 pages/month
Maximum: 12,000 pages/month
In the Box DVD-ROM, Power cable, Guide Rib x 4

คำอธิบายเพิ่มเติม;

*1 For single paper (cut paper), it will be 0.06 to 0.25 mm.

*2 Do not use seam paper.

*3 Do not use roll paper that is taped or glued to the roll core

*4 Squareness and straightness do not include 4.2 mm from the edge of the paper.

*5 If the position of the black mark is 33.2 mm or more from the tip of the paper (previous cut position). It is recommended to cut at the center of the black mark.

*6 Printing speed varies depending on paper size, type, and thickness

*7 Operation is not guaranteed when using a UPS (Uninterruptible Power Supply) or an inverter.

*8 Equipment life depends on customer usage

OKI Systems (Thailand) Ltd.