Wireless(Infrastructure) Setting
Item | Factory default setting | Description | ||
|---|---|---|---|---|
| Enter Password | ********** | Input the password required to enter the Admin Setup menu. | ||
| Wireless(Infrastructure) | Disable | Enable/Disable the wireless LAN (Infrastructure). | ||
| Network Setting | IP Address Set | Auto | Set whether to obtain the IPv4 address automatically or input it manually. | |
| IPv4 Address | 192.168.101.100 | Input the IPv4 address manually. It is displayed when [IP Address Set] is set to [Manual]. | ||
| Subnet Mask | 255.255.255.0 | Input the subnet mask. It is displayed when [IP Address Set] is set to [Manual]. | ||
| Gateway Address | 0.0.0.0 | Input the gateway address. It is displayed when [IP Address Set] is set to [Manual]. | ||
| DHCPv6 | Disable | Set whether or not to obtain the IPv6 address automatically. Set it to Disable when you do not use the IPv6 address. | ||
| Auto Setup (WPS) | WPS-PBC | Execute it when setting is done by pressing the WPS button of the wireless LAN access point. | ||
| WPS-PIN | Execute it when the PIN code displayed on this machine is registered with the wireless LAN access point. | |||
| Wireless Network Selection | xxxxxx ... | Display the list of wireless LAN access points detected by this machine. | ||
| Manual Setup | SSID | Input the SSID. | ||
| Security | Disable | Set the security of the wireless LAN function. | ||
| WEP Key | Input the WEP key. | |||
| WPA Encryption Type | Display the WPA-PSK encryption type. The setting is carried out automatically according to the security settings. (They cannot be switched in this menu.) | |||
| WPA Pre-shared Key | Input the pre-shared key. It is displayed when [Security] is set to any other value than [Disable] or [WEP]. | |||
| Execute | Execute the changes to security settings. | |||
| Wireless reconnection | Reconnect to the wireless LAN (infrastructure). | |||