Boot Menu

  1. While holding «OK» on the operator panel, press the power button. When [Boot Menu] appears on the display, release your finger and press «OK» again.

  2. Press the scroll button ▲ or ▼ to input the admin password, and then press «OK».

    Administrator Password

  • This menu operation requires a restart.
Item
Factory default setting
Description

Enter Password

(Please refer to the password label attached on the inside of this machine.)Input the admin password required to enter the Boot Menu.

Menu Lockout

OffWhen [On] is set, the Admin Setup and user menu list are hidden and thus unavailable. However, only printing settings are displayed.

Panel Lockout

OffDisable the buttons on the operator panel.
[Mode1]: Enable «OK», «CANCEL», «HELP» and «BACK»; and disable ▲ and ▼.
[Mode2]: Disable all the buttons except «OK», «HELP» and «BACK».
[Off]: All the buttons can be used.

After AC power supply fails

Always Off

Set whether or not to restore the Ready-To-Print status automatically in case of a power failure.

Depending on the action mode of the machine, if the power cord is unplugged or power supply is interrupted (e.g. due to a power failure), the machine may not start by force unless a specified period of time has elapsed before the power cord is reconnected. (5 minutes in Japan, 6 minutes in Taiwan, and 8 minutes in other countries or regions except Japan and Taiwan)

[Always On]: This machine is started by force when the power failure is recovered without pressing the power button. This machine starts simply by connecting the power plug to the outlet.

[Always Off]: This machine does not start when the power failure is recovered without pressing the power button.
[Last State]: This machine remembers the state when the power supply is interrupted and restarts with that state after the power failure is recovered. This machine automatically restores the Ready-to-Print state when the power failure is recovered even if the power supply is interrupted due to a power failure while the machine is working. If a power failure occurs when the power is off, this machine does not start even after the power failure is recovered.