programvara

Svit för fast programvara


Sviten för fast programvara finns tillgänglig för nerladdning.

Tillämpbara modeller

C542; ES5442

* Uppdateringsverktyget för fast programvara krävs också för uppdatering efter att den fasta programvaran har laddats ner.

Laddar ner uppdateringsverktyget för fast programvara >


För att ladda ner sviten för fast programvara måste du acceptera följande ”Mjukvarulicensavtal”. Var noga med att läsa det innan nerladdning.

Läs Mjuvarulicensavtalet >

Specifikationer

Filnamn OKI_C542_A07.17_0_5_243423.bin
Version A07.17_0_5
Filstorlek 266,316,213 Byte
MD5 hash-värde 77e864f4f5de78c1dc490b06bd167cf2

Uppdateringshistorik

Firmware Ver. A07.17_0_5
CU:C7.17
PU:00.01.04
IM:01.02

1. Fixed a problem misdescription of toner empty message in Polish error log.
2. Fixed a problem when Error 078 occurred by panel operation.
3. Fixed a problem SC002 occur at the time of creating acertificate.
--------------------------------------------------------------------------------------
Firmware Ver. A07.15_0_5
CU:C7.15
PU:00.01.04
IM:01.02

1. Minor amendment.
--------------------------------------------------------------------------------------
Firmware Ver. A07.14_0_5
CU:C7.14
PU:00.01.04
IM:01.02

1. Treatment of the WPA2 protocol vulnerabilities.
--------------------------------------------------------------------------------------
Firmware Ver. A07.13_0_5
CU:C7.13
PU:00.01.04
IM:01.02

1. Upgrade Google Cloud Print™ security.
--------------------------------------------------------------------------------------
Firmware Ver. A07.09_0_5
CU:C7.09
PU:00.01.04
IM:01.01

1. Fixed a problem that GCP function does not work in Firmware Ver. A07.08.
--------------------------------------------------------------------------------------
Firmware Ver. A07.08_0_5
CU:C7.07
PU:00.01.04
IM:01.01

1. Updated regarding the smart Extendable Platform2.
2. Fixed a problem that print adjusting for tray3 does not work.
3. Fixed a problem that Reconnection does not work even if Reconnection is selected in Easy Setup.
4. Fixed a problem that over 17 charactors can be entered to POP password in EasySetup.
5. Fixed a wording problem that Quiet Mode and Silent Mode becomes the same word in some languages.
6. Fixed a problem that plural errors cannot be displayed in the same time while plural errors(Error:340-343:ID missing) occurs in the same time.
--------------------------------------------------------------------------------------
Firmware Ver. A05.02_0_5
CU:C5.02
PU:00.01.03
IM:01.01

1. Fixed a problem that one of the following status might occur when turning on or restarting the PC connected to the printer with the USB cable.
- Nothing is displayed (Stay in the sleep state)
- The display does not change with key operation
- Does not print
--------------------------------------------------------------------------------------
Firmware Ver. A05.01_0_5
CU:C5.01
PU:00.01.03
IM:01.01

1. Fixed a problem that printer sends unnecessary reply to a certain command.
--------------------------------------------------------------------------------------
Firmware Ver. A05.00_0_5
CU:C5.00
PU:00.01.03
IM:01.01

1. Fixed a problem that when acquisition method of an IP address was established automatically, and an IP address couldn't be acquired, status of 'acquisition failure' isn't indicated.
2. Fixed a problem that a card of the FeliCa Lite-S doesn't react.(Only Japanese model)
3. Fixed a problem that when setting equipment as Duplex=ON and doing simplex print of an envelope from a PS driver, 'duplex printing error' occurs.
4. Fixed a problem that even if the menu of "setting of an attention LED of the near life position" is invalidated, it isn't reflected. (Only overseas model)
5. Indication change of the condition of wireless LAN (the AP mode) information.
--------------------------------------------------------------------------------------
Firmware Ver. A03.04_0_5
CU:C3.04
PU:00.00.34
IM:01.00

1. Fixed a problem that takes time until the device shift to Sleep Mode after printing.
--------------------------------------------------------------------------------------
Firmware Ver. A03.03_0_5
CU:C3.01
PU:00.00.33
IM:01.00


1. Improved to be able to confirm the completion history of the job with a Panel, Web page and Report print.
2. Fixed the Portuguese messages displayed on the panel.
3. Fixed a problem that could not print a URL of the Google Cloud Print registration.
4. Fixed a problem that all jobs are not displayed with "Cancel" when an alarm occurred during printing with "Print All" of private print.
--------------------------------------------------------------------------------------


Kontakta OKI Europe

linkedin twitter youtube facebook

©1995-2019 Oki Europe Ltd.