3. Connecting with a device

Input the SSID and password of this machine in the wireless terminal to connect.

  1. Press the scroll button ▼ on the operator panel several times to select [Wireless(Wi-Fi Direct) Setting], and then press «ENTER».

  2. Input the administrator password using the numeric keypad, and then press «ENTER».

    • "It is not possible to use the Wireless(infrastructure)at the same time." will be displayed for about 5 seconds.
  3. Press ▲ to select [Enable], and then press «ENTER».

  4. Press ▼ several times to select [Manual Setup], and then press «ENTER».

  5. Check that [SSID], [Security] and [Password] of this machine are displayed.

  6. Input [SSID] and [Password] of this machine confirmed in Step 5 in the mobile device to connect.

    • If the wireless terminal is set to obtain the IP address automatically, you can communicate by connecting to this machine via Wi-Fi Direct and allocating the IPv4 address automatically to the wireless terminal.
    • The factory default IP address is [192.168.110.100].
    • If you cannot connect, see "Troubleshooting for wireless LAN connection".

Then, go to "Installing software on your PC".

When using a mobile device, go to "Printing from a mobile device".