Using SNMPv3

By using the SNMP manager that is compatible with SNMPv3, the management of this machine can be encrypted with SNMP.


  1. Open the web page of this machine.

  2. Log in as an administrator.

  3. Select [Network Setup].
  4. Click the [Menu] button on the upper right corner, and then select [Protocol] - [SNMP].
  5. Configure the settings following the on-screen instructions.
  6. Click [Apply].
    The new settings will take effect after the network function of the machine has been reset.

  • You can use a commercially-available SNMP manager to verify and change the settings of this machine. For the MIB of this machine, please refer to the supplied DVD, and check the MIB definition file in [Misc] - the [MIB Files] folder.