Menus

Tray Configuration











































MPTray Config




Paper Size (Fn90)A4 [LEF]Set the size of the paper you want to print on from the MP tray.
X Dimension (Fn91)210 mm Set the paper width when you have selected a custom size for the paper that you want to print on from the MP tray.
Y Dimension (Fn92)297 mmSet the paper length when you have selected a custom size for the paper that you want to print on from the MP tray.
Media Type (Fn93)PlainSet the type of paper that you want to print on from the MP tray.
Media Weight (Fn94)Light Set the weight of the paper that you want to print on from the MP tray.
Tray Usage (Fn95)When Mismatching

Set how to use the MP tray. The available values are as follows.

[Normal Tray]: Treat the MP tray as a normal tray like Tray 1 or Tray 2/3/4/5 (optional).

[When Mismatching]: You can print from the MP tray with the correct paper loaded when paper loaded in the specified tray is different from the paper size in the print data.

[Do Not Use]: The MP tray will be ignored or switched to another tray automatically.

Tray1 Config





Paper Size (Fn10)Cassette SizeSet the size of the paper you want to print on from Tray 1.
X Dimension (Fn11)210 mmSet the paper width when you have selected a custom size for the paper that you want to print on from Tray 1.
Y Dimension (Fn12)297 mmSet the paper length when you have selected a custom size for the paper that you want to print on from Tray 1.
Media Type (Fn13)PlainSet the type of the paper you want to print on from Tray 1.
Media Weight (Fn14)LightSet the weight of the paper you want to print on from Tray 1.
Legal PaperLegal 14Set the size of Legal Paper for Tray 1.
Other Size16K (184 x 260mm)[SEF]Specify the paper size when the paper size dial of Tray 1 is set to [Other].
Tray2 Config





Paper Size (Fn20)Cassette Size

Set the size of the paper you want to print on from Tray 2.

For [Cassette Size], the settings of the paper size dial of the paper tray will be followed.

X Dimension (Fn21)210 mmSet the paper width when you have selected a custom size for the paper that you want to print on from Tray 2.
Y Dimension (Fn22)297 mmSet the paper length when you have selected a custom size for the paper that you want to print on from Tray 2.
Media Type (Fn23)Plain Set the type of the paper you want to print on from Tray 2.
Media Weight (Fn24)LightSet the weight of the paper you want to print on from Tray 2.
Legal PaperLegal 14Set the size of Legal Paper for Tray 2.
Other Size16K (184 x 260mm)[SEF]Specify the paper size when the paper size dial of Tray 2 is set to [Other].
Tray3 Config





Paper Size (Fn30)Cassette Size

Set the size of the paper you want to print on from Tray 3.

For [Cassette Size], the settings of the paper size dial of the paper tray will be followed.

X Dimension (Fn31)210 mmSet the paper width when you have selected a custom size for the paper that you want to print on from Tray 3.
Y Dimension (Fn32)297 mmSet the paper length when you have selected a custom size for the paper that you want to print on from Tray 3.
Media Type (Fn33)PlainSet the type of the paper you want to print on from Tray 3.
Media Weight (Fn34)LightSet the weight of the paper you want to print on from Tray 3.
Legal PaperLegal 14Set the size of Legal Paper for Tray 3.
Other Size16K (184 x 260mm)[SEF]Specify the paper size when the paper size dial of Tray 3 is set to [Other].
Tray4 Config





Paper Size (Fn40)Cassette Size

Set the size of the paper you want to print on from Tray 4.

For [Cassette Size], the settings of the paper size dial of the paper tray will be followed.

X Dimension (Fn41)210 mmSet the paper width when you have selected a custom size for the paper that you want to print on from Tray 4.
Y Dimension (Fn42)297 mmSet the paper length when you have selected a custom size for the paper that you want to print on from Tray 4.
Media Type (Fn43)PlainSet the type of the paper you want to print on from Tray 4.
Media Weight (Fn44)LightSet the weight of the paper you want to print on from Tray 4.
Legal PaperLegal 14Set the size of Legal Paper for Tray 4.
Other Size16K (184 x 260mm)[SEF]Specify the paper size when the paper size dial of Tray 4 is set to [Other].
Tray5 Config





Paper Size (Fn50)Cassette Size

Set the size of the paper you want to print on from Tray 5.

For [Cassette Size], the settings of the paper size dial of the paper tray will be followed.

X Dimension (Fn51)210 mmSet the paper width when you have selected a custom size for the paper that you want to print on from Tray 5.
Y Dimension (Fn52)297 mmSet the paper length when you have selected a custom size for the paper that you want to print on from Tray 5.
Media Type (Fn53)PlainSet the type of the paper you want to print on from Tray 5.
Media Weight (Fn54)LightSet the weight of the paper you want to print on from Tray 5.
Legal PaperLegal 14

Set the size of Legal Paper for Tray 5.

Other Size16K (184 x 260mm)[SEF]Specify the paper size when the paper size dial of Tray 5 is set to [Other].
Paper Feed (Fn80)Tray 1Specify the paper tray.
The settings of the printer driver take priority.
Auto Tray SwitchOnSet whether or not to use the Auto Tray Switch function.
The settings of the printer driver take priority.
Tray SequenceDownSpecify the tray sequence for Auto Tray Selection/Auto Tray Switch.
Duplex Last PageSkip Blank PageSet whether or not to print the last 1-sided page when the duplex printing is done on odd-numbered pages.
System AdjustPower Save Time (Fn200)1 minuteSet the time that will elapse before the power save mode is entered.
Value range: 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, and 60 minutes
Sleep Time (Fn201)15 minutesSet the time that will elapse before the sleep mode is switched from the power save mode.
Value range: 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, and 60 minutes
Sleep After PrintingDisable

Set the machine to enter the sleep mode immediately after printing.
When it is set to [Enable], the machine enters the sleep mode as soon as possible after printing to save energy.
The printer may not immediately enter the Sleep Mode while the fan is working for cooling, while a warning/solution message is displayed, or after printing via USB.
[Enable]: The machine enters the sleep mode right after printing.
[Disable]: The machine does not enter the sleep mode right after printing.

Auto Power Off Time (Fn202)

15 minutes

Set the time that will elapse before the power is turned off automatically after the standby mode is entered.
Value range:15 minutes, 1 hour, 2 hours, 3 hours, 4 hours, 8 hours, 12 hours, 18 hours, and 24 hours
Silent ModeOnSpecify the printing preparations when the standby mode is switched from the sleep mode.
[On]: Silent due to no preparation for printing.
[Off]: The image drum makes a noise as it prepares for printing, facilitating a faster speed for the first printing start time.
Clearable WarningOnlineSet the timing to clear the recoverable error display.
Auto ContinueOffSet whether or not to automatically restore this machine when a memory overflow or tray request occurs.
Manual Timeout60 secondsSet the waiting time for loading the paper when you print with [Feed paper individually] checked in the printer driver. 
Value range: Off, 30 seconds, and 60 seconds
Timeout Injob40 secondsSet the time from loss of the data receipt (canceled by PostScript) until force-printing.
Value range: Off, 5 seconds, 10 seconds, 20 seconds, 30 seconds, 40 seconds, 50 seconds, 60 seconds, 90 seconds, 120 seconds, 150 seconds, 180 seconds, 210 seconds, 240 seconds, 270 seconds, and 300 Seconds
Timeout Local40 secondsSet the time to keep each port open after printing. (Except for network)
The value range is from 0 to 300 seconds in increments of 5 seconds.
Timeout Network90 secondsSet the time to keep the network port open after printing.
The value range is from 0 to 300 seconds in increments of 5 seconds.
Low TonerContinueSet the action of this machine when [Toner Low] is displayed.
This machine goes offline when [Stop] is selected.
Print Mode w/o Color TonerAlarmSpecify the action when there is an empty color toner cartridge.
[Alarm]: This machine stops without printing the color print data.
Replace the empty toner cartridge with a new one.
[Cancel]: Cancel color print data automatically.
Replace the empty toner cartridge with a new one.
Jam RecoveryOnSet whether to reprint pages not printed due to a paper jam after the paper jam is cleared.
When [Off] is selected, the printing process including pages missed due to the paper jam will be canceled.
Error Report (Fn210)OffSets whether to print error reports when an internal error occurs.
Hex Dump (Fn237)ExecutePrint the data received from the PC in hexadecimal dump. To exit this mode, turn off the power.
Print Adjust



Print Position Adjust



MP Tray (Fn220)X Adjust0.00 mmAdjust the printing position of each tray.
 • X Adjust: Correct the position of the entire print image perpendicularly to the paper travel direction.
Value range: ±2.00 mm (in increments of 0.25 mm)
• Y Adjust: Correct the position of the entire print image along the paper travel direction.
Value range: ±2.00 mm (in increments of 0.25 mm)
• Duplex X Adjust: Correct the position of the entire print image at the right angle to the paper travel direction for printing the face side during duplex printing (when printing the print side of paper fed from the duplex unit).
Value range: ±2.00 mm (in increments of 0.25 mm)
• Duplex Y Adjust: Correct the position of the entire print image along the paper travel direction for printing the face side during duplex printing (when printing the print side of paper fed from the duplex unit).
Value range: ±2.00 mm (in increments of 0.25 mm)
Tray 2/3/4/5 is displayed when the expansion tray is mounted.



Y Adjust0.00 mm
Duplex X Adjust0.00 mm
Duplex Y Adjust0.00 mm
Tray 1 (Fn221)X Adjust0.00 mm
Y Adjust0.00 mm
Duplex X Adjust0.00 mm
Duplex Y Adjust0.00 mm
Tray 2 (Fn222)X Adjust0.00 mm
Y Adjust0.00 mm
Duplex X Adjust0.00 mm
Duplex Y Adjust0.00 mm
Tray 3 (Fn223)X Adjust0.00 mm
Y Adjust0.00 mm
Duplex X Adjust0.00 mm
Duplex Y Adjust0.00 mm
Tray 4 (Fn224)


X Adjust0.00 mm
Y Adjust0.00 mm
Duplex X Adjust0.00 mm
Duplex Y Adjust0.00 mm
Tray 5 (Fn225)X Adjust0.00 mm
Y Adjust0.00 mm
Duplex X Adjust0.00 mm
Duplex Y Adjust0.00 mm
Paper Black Setting (Fn230)0Used for fine adjustment in case of noticeable blur etc. in the print results during mono printing when [Plain] is selected as [Media Type]. Decrease the value if printing such as scattered or snow-covered printing occurs in high-density printing. Increase the value if printing is blurred. Adjustable within the range of ±2.
Paper Color Setting (Fn231)0Used for fine adjustment in case of noticeable blur etc. in the print results during color printing when [Plain] is selected as [Media Type]. Decrease the value if printing such as scattered or snow-covered printing occurs in high-density printing. Increase the value if printing is blurred. Adjustable within the range of ±2.
Trans. Black Setting (Fn232)0Used for fine adjustment in case of noticeable blur etc. in the print results during mono printing when [Transparency] is selected as [Media Type]. Decrease the value if printing such as scattered or snow-covered printing occurs in high-density printing. Increase the value if printing is blurred. Adjustable within the range of ±2.
Trans. Color Setting (Fn233)0Used for fine adjustment in case of noticeable blur etc. in the print results during color printing when [Transparency] is selected as [Media Type]. Decrease the value if printing such as scattered or snow-covered printing occurs in high-density printing. Increase the value if printing is blurred. Adjustable within the range of ±2.
SMR Setting (Fn234)Cyan0Correct printing variations for each color due to differences in the temperature and humidity environment, and the printing density/printing frequency. Change the value if there is burr in the image. Adjustable within the range of ±3.
Magenta0
Yellow0
Black0
BG Setting (Fn235)Cyan0Correct printing variations for each color due to differences in the temperature and humidity environment, and the printing density/printing frequency. Change the value if the underlay is dark. Adjustable within the range of ±3.
Magenta0
Yellow0
Black0
HU SettingOffSet the mode to remove the dirt due to leaving this machine idle for a long period of time.
Drum Cleaning (Fn236)OffSet whether or not to empty the drum before printing when white streaks appear in the horizontal direction. When [On] is set, the remaining service life of the image drum will be shortened.
High Humid ModeOff

The paper may curl after printing in high humidity.
Changing this setting reduces paper curl.
Try [Mode 2] if setting to [Mode 1] is not effective.

  • Warm-up time and printing time will be longer. ([Off] < [Mode 1] < [Mode 2])
  • When [Mode 1] or [Mode 2] is set, the service life of the image drum will be shortened.
Moisture ControlOff

Enable/Disable the moisture control.

When [Mode 1] is set, it is possible to prevent the paper from absorbing moisture at high humidity and prevent the paper from getting wet. It may take much time to print the first page.

Setting to [Mode 2] can reduce white spots and lines during 2-sided printing. It may take much time to print the first page when switching from 1-sided printing to 2-sided printing.

Narrow Paper SpeedMode 1

Set the printing speed when narrow paper is used.

[Mode1]: The recommended mode for high-volume printing on narrow paper (with a width of 216 mm or less).

  • Switch the speed to a low speed when printing on narrow paper. The target paper weight ranges from Ultra Light to Medium.

[Mode 2]: The recommend mode for printing on a small amount of narrow paper. Print on narrow paper without reducing the speed.

  • When printing on a large amount of narrow paper, waiting time for fixing temperature adjustment is more likely to occur between sheets of paper.

[Mode 3]: This mode reduces possible printing defects at the edge of paper when printing on wide paper after printing a large amount of narrow paper.

  • To start printing on wide paper after printing on narrow paper, the waiting time for fixing temperature adjustment may be available.
  • Switch the speed to a low speed when printing on narrow paper. The target paper weight ranges from Ultra Light to Medium.
Ultra Light Paper Care ModeOff

When the ultra light paper is wrinkled, setting to [On] could reduce wrinkles and curls. But, the print speed will be slowed. The target paper weight is Ultra Light.

Stacker Full SettingEnable

Set whether or not to detect an error when the output tray becomes full.
[Enable]: Detects the stacker full error.
[Disable]: Ignores the stacker full error.