Applicable paper
In order to maintain high-quality printing, it is necessary to use paper that fulfills the quality, weight and surface finish conditions. Please use electrophotographic paper.
Depending on the type of paper used and the operating environment, print quality and paper feed performance may be affected. A test print is recommended beforehand.
For precautions for printing on various types of paper, please refer to "Paper precautions by type".
Paper type | Paper size | Paper weight | Other conditions |
|---|---|---|---|
| Plain | A3 | For simplex printing: 64 - 256 g/m2 For duplex printing: 64 - 220 g/m2 | If the paper size settings meet the follow conditions, the print speed will be slowed.
|
| A4 | |||
| A5 | |||
| A6 | |||
| B4 | |||
| B5 | |||
| B6 | |||
| B6 Half | |||
| B7 | |||
| B8 | |||
| Letter | |||
Legal (13 inches) | |||
Legal (13.5 inches) | |||
Legal (14 inches) | |||
| Executive | |||
| Tabloid | |||
| Statement | |||
| 8.5-inch SQ | |||
| Folio (210 x 330 mm) | |||
| 8K (260 x 368 mm) | |||
| 8K (270 x 390 mm) | |||
| 8K (273 x 394 mm) | |||
| 16K (184 x 260 mm) | |||
| 16K (195 x 270 mm) | |||
| 16K (197 x 273 mm) | |||
| 4 x 6 inches | |||
| 5 x 7 inches | |||
Custom Width: 55 - 297 mm Length: 90 - 1,321 mm | 64 - 256 g/m2 | ||
| Long paper (210 x 1200 mm) | 128 g/m2 | ||
| Long paper (297 x 1200 mm) | |||
| Envelope | Nagagata#3 | Paper with a weight of 85 g/m2 | |
| Nagagata#4 | |||
| Nagagata#40 | |||
| Yougata#0 | |||
| Yougata#4 | |||
| Kakugata #2 | |||
| Kakugata #3 | |||
| Com-10 | Paper with a weight of 24 lb | Paper with the flap properly folded | |
| DL | |||
| C5 | |||
| C4 | |||
Index | Index (76.2 x 127 mm) (3 x 5 inches) | ||
| Labels | A4 | Total weight: 0.1 - 0.2 mm | Labels for electrophotographic printers or dry PPCs where the surface paper, adhesive, and backing are not degraded by heat. Media with a structure that prevents the front paper from peeling off from the backing in the heat fixing process of the printer. Media with a structure that prevents the front paper from peeling off the backing when the paper is traveling. Media with a combined weight of 0.1 to 0.2 mm of front paper and backing. Media whose surface paper covers the entire backing sheet with no adhesive sticking out. Media with no breaks or creases. Duplex printing is not available. |
| Letter | |||
| Partially printed paper | Equivalent to plain paper | 64 - 256 g/m2 | Media whose ink used for partial printing is heat resistant and can withstand 230 °C. |
| Colored paper | Equivalent to plain paper | 64 - 256 g/m2 | Media whose pigment or ink used to color the paper is heat resistant and can withstand 230 °C. Media made of electrophotographic paper with the same features as plain paper. |
![]()
- For thick paper, the toner may stick thinly to the whole paper or the printing may be light.
- If the paper grain direction does not match the paper feeding direction, paper jams may occur.
- Printing with the MP tray may cause wrinkles. In this case, feed paper from the paper cassette.
- Do not use paper that has been printed once with a thermal transfer printer, inkjet printer, etc.
- The paper wrapper shows the orientation of the surface. Load paper properly so that the surface is the printing surface.
- After unpacking, rewrap the remaining paper in the wrapping paper and reseal it, or place it in a plastic bag and close it tightly, and then store it in a low-humidity area.
- The paper is wrapped in moisture-proof paper to prevent moisture. Please use the paper as early as possible after opening its package.
- Wrap unused paper in the wrapping paper, and keep it away from moisture absorption as much as possible.
The toner may stick thinly to the whole sheet of recycled paper or the printing may be light.
Some recycled paper contains additives that may reduce the printing quality. Be sure to use electronic photo printer after confirming that it is recycled paper.
