Basic Procedure for Scan to Fax Server
This section explains the basic procedure for sending data to the fax server.
The fax server function allows you to send fax data as an e-mail attachment file. The scanned document is converted to a TIFF file. The data is not saved in memory, and is sent immediately after scanning. You just specify an e-mail address as a destination.
You must enable the Scan to Fax Server function in Admin Setup.
Enabling the Scan to Fax Server Function
If Scan to Fax Server function is enabled, fax receptions and transmissions that use a telephone line are disabled.
Set a network and e-mail default setting before using the Scan to Fax Server function.
Connecting This Machine to a Network
Memo
-
You can not use mixed size documents.
-
The document data that is sent with the Scan to Fax Server function may not be printed properly depending on the recipient's unit.
-
The details on the Scan to Fax Server function are the same as those on the Scan To E-mail function.
-
Press [Fax/Internet Fax] or the
(FAX) button. -
Set a document in the ADF or on the document glass.
-
Press [Fax].
-
Change other settings if necessary.
Memo
-
Turn [Preview] on the [Advanced] tab to ON and press [Preview] to preview the image to send.
-
When [Rotate Tx] is set to ON, A4
documents are rotated and sent as A4 
documents and Letter documents are rotated and sent as Letter documents.
-
-
Press the
(START) button.