Using Image Capture (Mac OS X)

To scan using Image Capture, preparation procedure such as installation of the scanner driver is required.

Before Using Remote Scan

You also need to set the machine in the stand-by mode for Remote Scan before starting scanning on the computer.

How to Use Remote Scan

The ICA driver does not support Windows.

The ICA driver does not support Mac OS X 10.6.7 or earlier.

Note

  • A document on the document glass can be scanned to the A4 size only.

  • A file can be saved only in JPEG.

  • Start Image Capture in advance. Select a device from a list that is displayed on the left side of the Image Capture screen.

  • Use Image Capture in the standard view. This function cannot be used in the detail view.

  1. Set a document in the ADF or on the document glass.

  2. Start Image Capture on the computer.

  3. Select the machine from the list on the left side of the Image Capture screen.

  4. Click [Scan].

    Scanning starts.

  5. Select [Close Image Capture] from [Image Capture].

You can adjust how a document is scanned by changing the driver settings.

The following explains each setting item.

If you display detailed information, you can adjust how a document is scanned in details.

  1. Set a document in the ADF or on the document glass.

  2. Start Image Capture on the computer.

  3. Select the machine from the list on the left side of the Image Capture screen.

  4. Click [Display the detailed information].

  5. Change the setting if necessary.

  6. Click [Scan].