Network Connection Problems

  • Common to Windows and Mac OS X

Cause

Solution

Reference

Using a cross cable.

Use a straight cable.

-

The machine was turned on before a cable was connected.

Connect cables before turning the machine on.

Connecting This Machine to a Network

There is a problem with the compatibility with the hub.

Press [Device Settings], select [Admin Setup] > [Network Menu] > [Network Setup] > [Network Setting] > [HUB Link Setting], and then change the setting.

-

The network connection setting is incorrect.

To connect to a wired network, set [Wired] for the network connection to [Enable].

Connecting This Machine to a Network

  • For Windows

Cause

Solution

Reference

The IP address is incorrect.

  • Check that the same IP address is set for the machine and the machine's port setting on the computer.

  • Check that the IP address is not duplicated by another device.

  • Check that the correct IP address, subnet mask, and gateway address are set.

  • If using OKI LPR Utility, check the IP address setting with OKI LPR Utility.

Easy Setup

OKI LPR Utility

All pages are not printed.

If you are using the WSD port, change it to the standard TCP/IP port.

-