Setting a Document

This section describes how to set documents.

About Where to Set a Document

Set a document in the ADF or on the document glass to copy, scan, or fax the document.

  • ADF

Scannable size

A3, A4 Landscape, A4 Portrait, A5 Landscape, A5 Portrait, A6 Portrait, B4, B5 Landscape, B5 Portrait, Tabloid, Letter Landscape, Letter Portrait, Legal 13/13.5/14, Executive Portrait, Statement Landscape, Statement Portrait, Folio

Paper capacity

100 sheets (80 g/m2)

Paper weight

60 to 120 g/m2(16 to 32 lb)

  • Document glass

Scannable size

A3, A4 Landscape, A4 Portrait, A5 Landscape, A5 Portrait, A6 Portrait, B4, B5 Landscape, B5 Portrait, Tabloid, Letter Landscape, Letter Portrait, Legal 13/13.5/14, Executive Portrait, Statement Landscape, Statement Portrait, Folio

Document thickness

Up to 20 mm

Memo

Duplex scan is not available for A5 Portrait, A6, B5 Portrait, Statement Portrait.

Note

For documents on which adhesives, ink, or correction fluid is used, make sure that they have completely dried before setting.

About Documents That Cannot be Set

You cannot set the following documents in the ADF. Use the document glass, instead.

  • Documents with holes or tears

  • Badly curled or rolled documents

  • Damp documents

  • Documents that are stuck together due to static electricity

  • Carbon-backed documents

  • Cloth, metal sheets, OHP films

  • Stapled, clipped, or taped documents

  • Documents that are pasted each other, or documents with glue

  • Glossy documents

  • Coated documents

Observe the following to avoid damaging the document glass.

  • When copying a thick document, do not press on it on the document glass.

  • Place a hard document gently.

  • Do not set a document that has sharp protrusions.

Symbols Indicating Document Orientation

  • Landscape This symbol indicates that the document is placed in the vertical orientation from the front of this machine.

    For the ADF, place the document in such a way as to feed the long edge first.

  • Portrait This symbol indicates that the document is placed in the horizontal orientation from the front of this machine.

    For the ADF, place the document in such a way as to feed the short edge first.

  • When setting an A4 Landscape document in the ADF

  • When setting an A4 Portrait document in the ADF

  1. Set a document face up in the ADF.

  2. Align the document guide to the document width.

    Note

    • If ADF paper feed problems often occur, reduce the number of document pages to set.

    • Documents of up to 100 sheets (80 gsm) and 10 mm high can be loaded regardless of the size.

    • For curled documents, make sure that the document guides fit to the document width.

    Memo

    The machine automatically detects the following document sizes.

    Basis

    Detectable sizes

    AB

    A3, A4 Landscape, A4 Portrait, A5 Landscape, A5 Portrait, A6 Portrait, B4, B5 Landscape, B5 Portrait, Folio

    Letter

    Tabloid, Letter Landscape, Letter Portrait, Legal14, Executive Portrait, Statement Portrait

    *If Legal14 is detected in the Letter series, the value between Legal13, Legal13.5, and Legal14 which is specified from [Device Settings] > [Admin Setup] > [Scanner Setup] > [Default Settings] > [Auto detect Scan Size] > [Legal Size] is set as Scan Size.

  1. Open the document glass cover.

  2. Set a document face down on the document glass.

    Note

    Do not press the document glass forcefully.

  3. Close the document glass cover gently.

    Memo

    The machine automatically detects the following document sizes.

    Basis

    Detectable sizes

    AB

    A3, A4 Landscape, A4 Portrait, A5 Landscape, A5 Portrait, A6 Portrait, B4, B5 Landscape, B5 Portrait, Folio

    Letter

    Tabloid, Letter Landscape, Letter Portrait, Legal14, Executive Portrait, Statement Portrait

    *If Legal14 is detected in the Letter series, the value between Legal13, Legal13.5, and Legal14 which is specified from [Device Settings] > [Admin Setup] > [Scanner Setup] > [Default Settings] > [Auto detect Scan Size] > [Legal Size] is set as Scan Size.

    Note

    • When the document is set on the document glass, the document size is detected after the document glass cover is closed. Be sure to close the document glass cover.

    • For documents thicker than 1.5 mm, the document size may not be detectable.