Boot Menu

Boot Menu is used to change system settings.

Only the administrator should use this menu.

To enter the [Boot Menu] menu, an administrator password is necessary.

  1. When this machine turns on and [PLEASE WAIT] is displayed on the display screen, press the «ENTER» button.

    When [Boot Menu] is displayed, release your finger and press the «ENTER» button again.

  2. Enter the administrator password using the numeric (0-9) keys, and then press the «ENTER» button.

    The default administrator password is “123456”.

  3. Press the scroll button or to select the setup menu on which you want to change a setting and then press the «ENTER» button.

  4. Press the scroll button or to change the setting.

  5. Press the «ENTER» button.

  6. Press the «ON LINE» button to exit the menu mode.

The printer reboots and the setting is updated.

Boot Menu

Item

Factory Default

Description

Wireless Module

Enable

Disable

Enable this setting when the optional wireless LAN module is installed into a wireless LAN module-unmounted model (dn series). The installed wireless LAN module cannot be used unless this setting is turned to [Enable].

This setting is set to [Enable] for a wireless LAN module-mounted model (dnw series) and [Disable] for wireless LAN module-unmounted model (dn series) by the factory default.

Menu Lockout

Off

When set to [On], the lists of Administrator Setup menu and User Setting menu are hidden and cannot be selected. Only print setting is displayed.

Panel Lockout

Off

Disables button/key operation on the operator panel.

[Mode1]: Disables all keys except for ONLINE, Settings, Cancel, Power save, and Help.

[Mode2]: Enables all keys except for ONLINE and Settings.

[Off]: Does not restrict button/key operation on the operator panel.

After AC power supply fails

Always Off

Sets whether to resume the printable machine automatically when the power supply stops due to power stoppage, etc.

Always On:

The machine reboots forcibly when the power supply restores without pressing the power switch.

<Usage Notes>

Plug the power code into the outlet, the device reboots.

Always Off:

The machine does not reboot automatically when the power supply restores. Turn on the machine to press the power switch.

Last State:

The machine memorizes the state at the time when the power supply stopped and restores the state when the power supply restores. If the power supply stops due to the power stoppage, etc. while the machine is turned on, this function automatically restores the printable state when the power supply restores. If the machine is off when the power supply stops, the machine does not reboot even though the power supply restores.