Scanning with AirPrint (Scan)

Before using AirPrint with Mac OS X, register this machine on the computer.

Registering the Machine in a Computer (Mac OS X)

There are three Remote Scan modes: Simple Scan, Manual Scan, and Secure Scan.

Simple Scan: If the machine is waiting, scanning is always available.

Manual Scan: After set the machine to the remote scan mode, scanning is available.

Secure Scan: Set the machine to the remote scan mode and specify the scanning device. Scanning is only available for the specified device.

  1. Press the (SETTING) button on the operator panel.

  2. Press the button once to select [Admin Setup] and press the button.

  3. Enter the administrator password, and then press the (OK) button.

    Memo

    The factory default administrator password is "999999". If the administrator password is changed, enter the updated password.

  4. Press the or button to select [Scanner Setup] and press the button.

  5. Press the or button to select [PC Scan Mode] and press the button.

  6. Select a scan mode and press the (OK) button.

  7. Press the button until the home screen is displayed.

  1. Confirm that this machine is in the standby mode (home screen).

  2. Set a document in the ADF or on the document glass.

  3. Start a scan program on the computer.

  4. Click a scan button in the scan program.

  1. Press the (SCAN) button on the operator panel.

  2. Set a document in the ADF or on the document glass.

  3. Press the or button to select [Remote Scan AirPrint] and press the button.

  4. Start a scan program on the computer.

  5. Click a scan button in the scan program.

  1. Press the (SCAN) button on the operator panel.

  2. Set a document in the ADF or on the document glass.

  3. Press the or button to select [Remote Scan AirPrint] and press the button.

  4. Start a scan program on the computer.

  5. Click a scan button in the scan program.