Network Card Setup (Mac OS X)
You can use Network Card Setup to configure the network.
To use Network Card Setup, TCP/IP must be activated.
Setting the IP Address
-
Start Network Card Setup.
-
Select this machine from the list.
-
Select [IP Address Settings] from the [Operations] menu.
-
Change other settings if necessary, and then click [Save].
-
Enter the password, and then click [OK].
-
The default password is the last six alphanumerical digits of the MAC address.
-
The password is case sensitive.
-
-
Click [OK] to enable new settings.
The network card of this machine restarts.
Configuring Web Settings
You can set the network settings for this machine by starting Network Card Setup.
Enabling Web Settings
-
Start Network Card Setup.
-
Select this machine from the list.
-
Select [Web Settings] from the [Operations] menu.
-
Check [Device web settings will be enabled], and then click [Save].
-
Enter the password, and then click [OK].
-
The default password is the last six alphanumerical digits of the MAC address.
-
The password is case sensitive.
-
-
Click [OK] in a confirmation window.
Opening the Web page
-
Starts Network Card Setup.
-
Select this machine from the list.
-
Select [Show Device Webpage] from the [Operations] menu.
The Web page opens, and the machine status page is displayed.
Quitting Network Card Setup
-
Select [Quit] from the [Network Card Setup] menu.