Printing a Received Fax
A received fax is automatically printed. You can specify a paper tray to use.
Note
Do not pull the paper tray out during printing.
Memo
-
Use only plain or recycled paper.
Available paper size is as follows.
|
Basis |
Available Paper Size |
|---|---|
|
AB |
A3, A4 |
|
Letter |
Tabloid, Letter |
, A4 
, A5 If [Device Settings] > [Admin Setup] > [Manage Unit] > [System Setup] > [Default Paper Size] is set to A4, see AB series. If set to Letter, see Letter series.
-
If a received fax is larger than a specified paper size, the fax is reduced, discarded, or printed onto multiple sheets of paper depending on the reception print settings.
Setting a Print Method for When a Received Image Exceeds Paper Size
Selecting a Tray to Use
-
Press [Device Settings] on the touch panel.
-
Press [Paper Setup].
-
Press [Select Tray].
-
Press [Fax].
-
Specifies a tray to use.
-
Select a setting.
-
The paper tray with [ON(Prior)] set is used ahead of another tray that holds paper of the same size.
-
The MP tray is set to [OFF] by factory default.
-
-
Press [Back] until the home screen is displayed.
If You Cannot Print a Received Fax
Even if the machine cannot print received faxes due to a lack of paper or paper jams, the machine can receive data of up to 8192 sheets. (However, this amount varies depending on the remaining memory space or document content.) If the machine cannot print received faxes due to a lack of paper or paper jams, refer to the following items to solve a problem. If the problem is solved, printing automatically starts.