Copying Both Sides of a Card to One Side (ID Card Copy)

This function enables you to copy both sides of an ID card, such as a driver's license, on one side of a sheet of paper.

Note

  • You cannot use the ADF for this ID Card Copy function.

  • Set the ID card with the upper side facing leftward.

  • 2 mm from the edge of the document glass is the scan margin.

  • The machine scans an area half the size of the specified paper. If the document is more than half the size of the paper size, the excess part is discarded.

  1. Press [Copy] or the (COPY) button.

  2. Press [ID Card Copy] on the [Advanced] tab.

    [ID Card Copy] is set to [ON].

    Memo

    Pressing [ID Card Copy] switches between [ON] and [OFF].

  3. Set your card with the front side down on the document glass.

  4. Enter the number of copies.

  5. Press the (START) button.

  6. When the [Please set back side of document.] screen is displayed, place your card with the back side down on the document glass.

    Memo

    If you press [Scan Complete], only the front side is copied without scanning the back side.

  7. Press [Start Scan].