-
Press [Scan] or
(Scan). -
Set a document in the ADF or on the document glass.
-
Press [Scan To Computer].
-
Press [Select A Connecting PC].
-
Press [From Network] or [From USB Interface] in accordance with the connection method of the machine and computer.
-
For the network connection, select a destination computer to which the data is sent.
Memo
If the target computer is not listed in the destination computers, register the computer with Network Configuration.
Registering the Machine (New Device) to a Computer Using Network Configuration
-
Press [Select An Application].
Memo
-
If you select [Application], the application that you specify [Application-1] of ActKey or dedicated application for Windows starts, and then the scanned image is displayed on the application.
-
If you select [Folder], the scanned document is saved in the specified folder.
-
If you select [PC-FAX], a fax transmission application starts. After sending the scanned document, send a fax with the fax transmission application on your computer.
-
-
Select the destination.
-
Press
(START).
If the machine is connected via USB and ActKey does not start on the computer even when the 
(START) button is pressed, follow the steps to start ActKey.
-
Click [Start], and then select [Devices and Printers].
-
Right-click [USB Device], and then [Scan properties].
If the [User Account Control] dialog box is displayed, click [Yes].
-
Click the [Events] tab.
-
Select an event from [Select an event].
-
Select [Start this program], and then select [ActKey].
-
Repeat steps 4 and 5 so that all events are set to [ActKey].
-
Click [OK].