микропрограммного

Пакет микропрограммного обеспечения


Пакет микропрограммного обеспечения доступен для загрузки.

Применяемые модели

C942; ES9542; Pro9542

* Для обновления микропрограммного обеспечения после его загрузки требуется средство обновления.

Загрузка средства обновления микропрограммного обеспечения >


Для загрузки пакета микропрограммного обеспечения необходимо принять условия лицензионного соглашения. Обязательно ознакомьтесь с ними перед загрузкой.

Ознакомиться с лицензионным соглашением >

Технические характеристики

Название файла OKI_C942_C01.12_0_4_236482.bin
Версия C01.12_0_4
Размер файла 47,121,109 Byte
Значение хэша MD5 a394b4376fef57c304472a5500e3562d

Журнал обновлений

Firmware Ver.  C01.12_0_4
CU-Loader: 01.07
CU: C1.18
PU: 00.02.13
PortCPU: 00.00.17
DriverCPU: 00.00.25
Duplex: 00.00.22
OptionTray: 00.00.33
IM: 01.00
NIC: Protocol: 02.04
     Web: 02.02
     Config: 02.01

1. Improved function.

-------------
Firmware Ver.  C01.11_0_4
CU-Loader: 01.07
CU: C1.17
PU: 00.02.13
PortCPU: 00.00.17
DriverCPU: 00.00.25
Duplex: 00.00.22
OptionTray: 00.00.33
IM: 01.00
NIC: Protocol: 02.04
     Web: 02.02
     Config: 02.01

1. Fixing the problem that switching trays during continuous printing might display inappropriate paper request error.
2. Fixing the problem that filling in the frame with spot color when printing a framed watermark with spot color. (PCLXL)

-------------
Firmware Ver.  C01.10_0_4
CU-Loader: 01.07
CU: C1.14
PU: 00.02.12
PortCPU: 00.00.17
DriverCPU: 00.00.25
Duplex: 00.00.22
OptionTray: 00.00.33
IM: 01.00
NIC: Protocol: 02.04
     Web: 02.02
     Config: 02.01

1. Addition of the menu "Spot Color Print".
   [Admin Setup]-[Color Setup]-[Spot Color Print] : Enable/Disable
   This menu is set to enable or disable of the spot color print.
   If do not use the spot color for a long term, by setting to "Disable", it is possible to reduce the consumption of spot color consumables.
   *In the setting of "Disable", spot color printing will be impossible.
2. Modified to execute the automatic density adjust and automatic registration adjust even spot color toner is empty.
3. Modified to display an error in the density adjust and registration adjust. (Manually execution only)
4. Corresponded to the Envelope dedicated fuser unit.
5. Modified to the print speed when "Narrow Paper Speed" sets to "Normal2".
6. Fixing the problem that may not enter the sleep mode when performing a menu operation immediately after returning from sleep mode.
7. Fixing the problem that may not work even if execute the "Adjust Density" or "Adjust Registration" or "Transfer Roller Cleaning".

-------------
Firmware Ver.  C01.06_0_4
CU-Loader: 01.07
CU: C1.09
PU: 00.02.10
PortCPU: 00.00.17
DriverCPU: 00.00.25
Duplex: 00.00.22
OptionTray: 00.00.33
IM: 01.00
NIC: Protocol: 02.02
     Web: 02.01
     Config: 01.02

1. Reduce the FAN sound at standby mode.
2. Improve the accuracy of print start position.
3. Fixing the problem that the registration misalignment sometimes occurred.

-------------
Firmware Ver.  C01.05_0_4
CU-Loader: 01.07
CU: C1.07
PU: 00.02.08
PortCPU: 00.00.17
DriverCPU: 00.00.25
Duplex: 00.00.22
OptionTray: 00.00.33
IM: 01.00
NIC: Protocol: 02.02
     Web: 02.01
     Config: 01.02

1. Expanded the adjustable range of Registration Adjust.
2. Fixing the problem that the Error002 is sometimes detected.
3. Fixing the problem that printer cannot connect to the network. "Network Initializing" message is frequently displayed on the panel.

-------------
Firmware Ver.  C01.04_0_4
CU-Loader: 01.07
CU: C1.05
PU: 00.02.07
PortCPU: 00.00.17
DriverCPU: 00.00.25
Duplex: 00.00.22
OptionTray: 00.00.33
IM: 01.00
NIC: Protocol: 02.02
     Web: 02.01
     Config: 01.02

1. Fixing the problem that the abnormal noise occurs from the image drum by the toner supply problem.
2. Fixing the problem that the faded print occurs by the toner supply problem.
3. Fixing the problem that the remaining toner display is reduced rapidly when turn ON the power or cover open and close.

-------------
Firmware Ver.  C01.03_0_4
CU-Loader: 01.07
CU: C1.05
PU: 00.02.06
PortCPU: 00.00.17
DriverCPU: 00.00.25
Duplex: 00.00.22
OptionTray: 00.00.33
IM: 01.00
NIC: Protocol: 02.02
     Web: 02.01
     Config: 01.02

1. Fixing the problem that the Error106 is sometime detected when power turned ON, and it can not be cleared.
2. Fixing the problem that the Error159 is sometimes detected.


Свяжитесь с OKI Europe

linkedin twitter youtube facebook