Removing Show-Through (Show-Through Removal)

Show-Through Removal removes show-through of text from the reverse side. You can select the removal level from OFF, Low, Middle, or High.

Note

  • This function is enabled only when [Background Removal] is set to [Auto].

  • This function is enabled only when [Document Type] is set to [Text] or [Text&Photo].

  1. Press the (SCAN) button on the operator panel.

  2. Set a document in the ADF or on the document glass.

  3. Press the or button to select a scan function and press the button.

    If you selected [USB Memory], go to step 5.

    Sending Scanned Data as an E-mail Attachment

    Saving Scanned Data to USB Memory

    Saving Scanned Data in a Shared Folder

  4. Press the or button to select [Scan Setting] and press the button.

  5. Press the or button to select [Image settings] and press the button.

  6. Press the or button to select [Show-Through Removal] and press the button.

  7. Press the or button to select the value you want to set and press the (OK) button.

    Memo

    • [Middle] is set by default.

    • If light color becomes too faint with Middle (default value), set to [Low] (show-through may not be removed completely).

    • If show-through is not completely removed with Middle (default value), set to [High] (light color may not be represented).

    • For documents printed only one side or when reproducing light color, set to [OFF]. (For documents printed on two side, show-through remains.)

  8. Change other settings if necessary, and then press the (MONO) or (COLOR) button.