Network Connection Problems (Scan)

  • Common to Windows and Mac OS X

Cause

Solution

Reference

Using a cross cable.

Use a straight cable.

-

The machine was turned on before a cable was connected.

Connect cables before turning the machine on.

Connecting a LAN Cable/USB Cable

There is a problem with the compatibility with the hub.

Press the (SETTING) button on the operator panel, select [Admin Setup] > [Network Menu] > [Network Setup] > [Network Setting] > [HUB Link Setting], and then change the setting.

-

The network connection setting is incorrect.

To connect to a wired network, set [Wired] for the network connection to [Enable].

Connecting a LAN Cable

Using Wired LAN and Wireless LAN at the Same Time (Only When the Wireless LAN Module is Mounted)

  • For Windows

Cause

Solution

Reference

The IP address is incorrect.

  • Check that the same IP address is set for the machine and the machine's port setting on the computer.

  • Check that the IP address is not duplicated by another device.

  • Check that the correct IP address, subnet mask, and gateway address are set.

  • If using OKI LPR Utility, check the IP address setting with OKI LPR Utility.

Easy Setup

OKI LPR Utility