Setting the Reception Mode

[Fax Ready Mode] is set by factory default.

Change the setting according to your environment.

  • [Fax Ready Mode] : Select this mode if you use this machine for fax only.

  • [Tel/Fax Ready Mode] : Select this mode if you want to receive both phone calls and faxes with the machine detecting automatically.

  • [Ans/Fax Ready Mode] : Select this mode if you want to use the answering phone function of an external telephone as well as the fax function of the machine.

  • [Tel Ready Mode] : Select this mode if you often use the external telephone that is connected to the machine.

  • [DRD] : If you use the distinctive ring detection (DRD) function that is provided by a telephone company. Refer to "DRD".

  1. Check that the machine is turned on.

  2. Press the (SETTING) button on the operator panel.

  3. Press the button to select [Admin Setup] and press the (OK) button.

  4. Enter the administrator password.

    Memo

    The factory default administrator name and password are "admin" and "999999" respectively.

  5. Select [Enter], and then press the (OK) button.

  6. Press the button to select [User Install], and then press the (OK) button.

  7. Press the button to select [Reception Mode], and then press the (OK) button.

  8. Press the button to select a reception mode, and then press the (OK) button.

  9. Press the button until the top screen is displayed.