Making Enlarged or Reduced Copies (Zoom)

Note

You can use [Auto] only if copying on A4, A5, A6, B5, B6, Letter, Legal13/13.5/14, Executive, Statement, Folio, or 8.5 SQ paper.

  1. Press the (COPY) button on the operator panel.

  2. Set a document in the ADF or on the document glass.

  3. Press the button.

  4. Press the or button to select [Zoom] and press the button.

  5. Select the zoom ratio and press the (OK) button.

    • When using [Auto]

    1. Select [Auto], and then press the (OK) button.

    • When selecting a preset zoom rate

    1. Press the or button to select the value you want to set and press the (OK) button.

    Memo

    If [Fit to page(98%)] is selected and the size of the document and the paper are the same, the document is reduced to fit the paper.

    • When setting the zoom rate by using the numeric keypad

    1. Enter the zoom rate from 25 to 400% by using the numeric keypad or pressing on the operator panel, and then press the (OK) button.

    Memo

    • You can set the rate in units of 1%.

    • If you enter an incorrect value, press the (CLEAR) button, and then enter the correct value.

  6. Press the (MONO) or (COLOR) button.

Memo

  • If [Paper Feed] is set to [Auto], [Zoom] is automatically set to [100%]. To select a different rate, set [Paper Tray], and then set [Zoom].

  • If [Paper Feed] is set to [Auto], the paper tray is automatically selected according to the selected zoom rate. To use a specific paper tray, reset [Paper Feed] again.

  • Even if [Paper Feed] is set to [Auto], you cannot select a paper tray that holds paper other than A4, A5, A6, B5, B6, Letter, Legal13/13.5/14, Executive, Statement, Folio, or 8.5 SQ paper. In this case, specify from [Paper Feed].

  • If [Paper Feed] is set to [Auto], the [Paper Feed] setting automatically changes from [Zoom] to [Auto]. A message is displayed on the display screen to inform you that the setting has been changed.