Initializing Flash Memory

Note

When you initialize flash memory, the following data is deleted.

  • The job data saved with [Shared Print] or [Private Print].

  • Form data

  1. Press [Device Settings] on the touch panel.

  2. Press or several times and press [Admin Setup].

  3. Enter the administrator name and password and press [OK].

    The factory default administrator name and password are "admin" and "999999" respectively.

  4. Press or several times and press [Manage Unit].

  5. Press or several times and press [Storage Maintenance Setup].

  6. Press [Initial Lock] to change the display to [Disable].

  7. Press [Back].

  8. Press [Flash Memory Setup].

  9. Press [Initialize] or [Format].

    Memo

    Select from 2 ways of initializing memory.

    • [Initialize]: Initializes the range of open area of Flash (displayed on File List).

    • [Format Partition]: Initializes user information.You can format the PCL/Common/PS partitions respectively.

  10. Press [Yes] on the confirmation screen.