Cleaning the Light-shielding Film

If the light-shielding film of the image drum becomes dirty, wipe the film by following the procedures below.

  1. Insert your finger into the recess on the right side of the machine and pull the front cover open lever (1) to open the front cover (2) forward.

  2. Press the open button (3) and open the output tray (4).

    Burns may result.

    The fuser unit is extremely hot. Do not touch it.

  3. Remove the image drum.

  4. Wipe the light-shielding film (5) with soft tissue paper.

  5. Put the image drum back to the printer.

  6. Close the output tray by pushing the center of the output tray firmly.

  7. Close the front cover (2).

    Note

    • The front cover cannot be closed if the output tray is not closed securely.