Initializing the Settings of the Device

You can return the configured settings of the device the following settings will return to the factory default settings.

Note

  • When you initialize the settings of the device, the following data is deleted.

    • Admin Password

    • Paper Setup settings

    • Print Setup settings

    • Manage Unit settings

    • User Install settings

  1. Press the button on the operator panel repeatedly to select [Setting] and press the (ENTER) button.

  2. Press the button once to select [Admin Setup] and press the (ENTER) button.

  3. Enter the administrator password, and then press the (ENTER) button.

    Memo

    The factory default administrator password is "999999". If the administrator password is changed, enter the updated password.

  4. Press the or button to select [Manage Unit] and press the (ENTER) button.

  5. Press the or button to select [Reset Settings] and press the (ENTER) button.

  6. When [Execute] is displayed, press the (ENTER) button.

  7. Press the or button to select [Yes] on the confirmation screen, and press the (ENTER) button.

    The machine reboots and the standby screen appears.