Setting PC Scan mode

Set the scan mode when scanning from a computer. This machine has the following three scan modes.

  • Simple Scan mode: You can start scanning anytime if the machine is in standby status.

  • Manual Scan mode: Turn on the Remote Scan function on the display screen before starting scanning.

  • Secure Scan mode: You can just operate from a computer specified when you turn on the remote scan function on the display screen. Only one computer can be connected at a time.

If you perform a remote scan via the WSD Scan connection, you can scan from computers that are already registered in this machine, regardless of the Remote Scan modes.

  1. Press the (SETTING) button on the operator panel.

  2. Press the button to select [Admin Setup] and press the button.

  3. Enter the administrator password, and then press the (OK) button.

    Memo

    The factory default administrator password is "999999". If the administrator password is changed, enter the updated password.

  4. Press the or button to select [Scanner Setup] and press the button.

  5. Press the or button repeatedly to select [PC Scan Mode] and press the button.

  6. Press the or button to select the mode and press the button.

  7. Press the button until the home screen is displayed.

    If [Manual Scan Mode] or [Secure Scan Mode] is selected, remote scan menus appear on the home screen.