In [Easy Setup], you can change the settings of date/time, fax, network, e-mail function by using the (SETTING) button on the operator panel.
-
Press the (SETTING) button on the operator panel.
-
Press the or button repeatedly to select [Easy Setup] and press the button.
-
Enter the administrator password, and then press the (OK) button.
Memo
The factory default administrator password is "999999". If the administrator password is changed, enter the updated password.
-
Follow the on screen instructions.
Date/Time Setting
Item |
Description |
||||
---|---|---|---|---|---|
Time Zone |
Sets the GMT time zone. |
||||
Daylight Saving |
Sets daylight saving to ON or OFF. |
||||
Server |
SNTP Server (Primary) |
Sets the SNTP server to use for setting the current date and time. You can enter up to 64 characters. |
|||
SNTP Server (Secondary) |
|||||
Manual |
Date |
Sets the current date and time manually. |
|||
Time |
Fax Setting
Item |
Description |
||||
---|---|---|---|---|---|
Fax Number |
Sets the fax number of this machine. You can enter up to 20 digits. |
||||
Sender ID |
Sets the sender's information. You can enter up to 22 characters. |
Network Setting
Item |
Description |
||||
---|---|---|---|---|---|
Enabling Default Gateway (If wireless LAN module fitted) |
Sets a wired LAN or wireless LAN. |
||||
Wireless Setting (If wireless LAN module fitted) |
WPS |
WPS-PBC |
WPS-PBC is executed. |
||
WPS-PIN |
WPS-PIN is executed. |
||||
Search |
A list of access point name found in the search |
Displays a list of wireless LAN access points' names that are found in a search. |
|||
Manual Setup |
SSID |
Enter an SSID. |
|||
Security |
Selects the security of the wireless LAN function. "WPA-EAP" and "WPA2-EAP" can be set only in Web. |
||||
WEP Key |
Enter WEP Key. Displays if [WEP] is selected for [Security]. |
||||
WPA Encryption Type |
Select a WPA/WPA2-PSK or WPA2-PSK encryption type. Displays if [WPA/WPA2-PSK] or [WPA2-PSK] is selected for [Security]. |
||||
WPA Pre-shared Key |
Enter the Pre-shared Key. Displays if [WPA/WPA2-PSK] or [WPA2-PSK] is selected for [Security]. |
||||
Reconnect |
Wireless reconnection is executed. |
||||
Obtaining IP address |
Sets to obtain the IP address automatically or manually. |
||||
IP Address |
Sets the IP address. You can enter up to 15 characters. |
||||
Subnet Mask |
Sets the subnet mask. You can enter up to 15 characters. |
||||
Default Gateway |
Sets the gateway address. You can enter up to 15 characters. |
||||
DNS Server (Primary) |
Sets the IP address for a Primary DNS server. You can enter up to 15 characters. |
||||
DNS Server (Secondary) |
Sets the IP address for a Secondary DNS server. You can enter up to 15 characters. |
||||
WINS Server (Primary) |
Sets the name or the IP address for the WINS server. You can enter up to 15 characters. |
||||
WINS Server (Secondary) |
Sets the name or the IP address for the WINS server. You can enter up to 15 characters. |
E-mail Setting
Item |
Description |
||||
---|---|---|---|---|---|
Mail Server Address |
Sets the IP address or host name for the SMTP server. You can enter up to 64 characters. |
||||
Sender's Address (From) |
Sets an e-mail address for this machine. |
||||
Receive Setting |
Sets the protocol to be used for receiving e-mails. |
||||
Authentication Method |
Sets the authentication method. |
||||
SMTP User ID |
Sets the login ID to the server used for SMTP authentication. You can enter up to 64 characters. |
||||
SMTP Password |
Sets the password to the server used for SMTP authentication. You can enter up to 64 characters. |
||||
POP3 Server |
Sets the IP address or host name for the POP3 server. You can enter up to 64 characters. |
||||
POP User ID |
Sets the login ID to the server used for POP authentication. You can enter up to 64 characters. |
||||
POP Password |
Sets the password to the server used for POP authentication. You can enter up to 16 characters. |