Scanning Documents of Different Sizes (Mixed Size)

You can set multiple documents having the same width but different lengths in the ADF and scan them in their respective paper sizes.

Documents can be set at the same time are as follows.

Specify the size of the larger document (size with *mark) for the document size.

  • A4 and Folio*

  • Letter and Legal 13*

  • Letter and Legal 13.5*

  • Letter and Legal 14*

Note

For the Scan To Computer, Remote Scan, and WSD Scan function, Mixed Size is not available.

  1. Press [Scan] or the (SCAN) button.

  2. Set a document in the ADF.

  3. Select a scan function.

    Sending Scanned Data as an E-mail Attachment

    Saving Scanned Data to USB Memory

    Saving Scanned Data in a Shared Folder

  4. Press [Mixed Size] in the [Advanced] tab or [Basic] tab to set it to [ON].

    Memo

    Pressing [Mixed Size] switches between [ON] and [OFF].

  5. Change other settings if necessary, and then press the (START) button.

    Note

    When using the Mixed Size function, be careful about the binding position of duplex documents.

    When scanning mixed-size duplex documents, specify the binding position for the bigger documents and bind smaller documents in the same direction as the bigger ones. (Their binding positions may not be the same.)

    • For Legal/Letter

      • For Legal documents with long-edge binding, set Letter documents with long-edge binding. (When loading in the ADF, set the documents so that their binding positions align to the top or bottom of the ADF.)

      • For Legal documents with short-edge binding, set Letter documents with short-edge binding. (When loading in the ADF, set the documents so that their binding positions align to the left or right of the ADF.)