Network Connection Problems (Print)

  • Common to Windows and Mac OS X

Cause

Solution

Reference

Using a cross cable.

Use a straight cable.

-

The machine was turned on before a cable was connected.

Connect cables before turning on the machine.

Connecting a LAN Cable

There is a problem with the compatibility with the hub.

On the touch panel, press [Device Settings], select [Admin Setup] > [Network Menu] > [Network Setup] > [Network Setting] > [HUB Link Setting], and then change the setting.

-

The network connection setting is incorrect.

To connect to a wired network, set [Wired] for the network connection to [Enable].

Connecting a LAN Cable

Using Wired LAN and Wireless LAN at the Same Time (Only When the Wireless LAN Module is Mounted)

  • For Windows

Cause

Solution

Reference

The IP address is incorrect.

  • Check that the same IP address is set for the machine and the machine's port setting on the computer.

  • Check that the IP address is not duplicated by another device.

  • Check that the correct IP address, subnet mask, and gateway address are set.

  • If using OKI LPR Utility, check the IP address setting with OKI LPR Utility.

Setting Up This Machine

OKI LPR Utility

The WSD port is used.

Change the print port to Standard TCP/IP Port.

-