Common to Windows and Mac OS X
-
The message, "Connect to PC failed." is displayed on the screen of the machine.
|
Point to check |
Solution |
Reference |
|---|---|---|
|
The IP address on the computer was changed. |
Newly register the computer to the machine. |
Registering the Machine (New Device) to a Computer Using Network Configuration |
|
The computer is not turned on. |
Turn on the computer. |
- |
|
The computer is not connected to a network. |
Make sure the network connection. |
- |
For Windows ActKey
-
The message, "Connect to PC failed." is displayed on the screen of the machine.
|
Point to check |
Solution |
Reference |
|---|---|---|
|
The document is not set in the position specified in Scan Method in ActKey. |
Set the document in the position specified in Scan Method in ActKey or change the setting for Scan Method. |
- |
|
When Paper Size in ActKey is set to "Auto", an undetectable size of documents are set on the machine. |
Set the optimal paper size other than "Auto" for Paper Size in ActKey. |
- |
|
In Windows Firewall setting, Network Configuration is disabled or blocked. |
Enable Windows Firewall setting in the following steps. From [Control Panel], click [System and Security] > [Allow a program through Windows Firewall]. Click [Change settings], find [Network Configuration] in [Allowed programs and features], select the check box, and then click [OK]. |
- |
|
On the USB-connected computer, Button Settings of ActKey or a warning message is displayed. |
Close Button Settings of ActKey or the warning message window. |
- |
-
"Access denied to PC." is displayed on the screen of the machine.
|
Point to check |
Solution |
Reference |
|---|---|---|
|
On the network computer, Button Settings of ActKey or a warning message is displayed. |
Close Button Settings of ActKey or the warning message window. |
- |