Enabling the Scan to Fax Server Function

To enable the Scan to Fax Server function, follow the procedure below in Admin Setup.

Note

If the Scan to Fax Server function is enabled, the fax function is disabled.

  1. Press [Device Settings] on the touch panel.

  2. Press or several times and press [Admin Setup].

  3. Enter the administrator name and password and press [OK].

    The factory default administrator name and password are "admin" and "999999" respectively.

  4. Press [FaxServer Function].

  5. Press [Environmental Settings].

  6. Press [FaxServer Function].

  7. Press [ON].

  8. Press [Yes] on a confirmation screen.

    The machine automatically restarts.