Setting a Tray to Print Received Documents

Set the paper feeding tray to be used when printing received faxes.

Note

  • Do not pull the paper tray out during printing. It may cause running out of paper or paper jams.

  • The machine can receive data of up to 8192 sheets. (However, this amount varies depending on the remaining memory space or document content.)

  • If the machine cannot print received faxes due to a lack of paper or paper jams, the machine starts printing when the problem is solved.

  1. Press [Device Settings] on the touch panel.

  2. Press [Paper Setup].

  3. Press [Select Tray].

  4. Press [Fax].

  5. Select the tray to be used.

  6. Select a setting.

    • The paper tray with [ON(Prior)] set is used ahead of another tray that holds paper of the same size.

    • The MP tray is set to [OFF] by factory default.

    • If there is a tray which is set to [ON] or [ON(Prior)], “---” is displayed as the setting value.

      You cannot set all the trays to [OFF].

  7. Press [Back] until the home screen is displayed.

Memo

  • Use only plain or recycled paper.

  • Available paper sizes are A4, A5, B5, Letter, Legal 13, Legal 13.5, Legal 14, Statement, Folio.

Basis

Available Paper Size for Printing Received Fax

AB

A4, A5, B5, Folio

Letter

Letter, Legal 13/13.5/14, Statement

Paper Size Priority

  • If a received fax is larger than a specified paper size, the fax is reduced, discarded, or printed onto multiple sheets of paper depending on the reception print settings.

Setting a Print Method for When a Received Image Exceeds Paper Size