The machine equipped with the Auto Power Off function which automatically turns off the power if the machine is left unoperated for a certain period of time.
There are three options for the Auto Power Off setting and [Auto Config] is set by factory default.
-
[Auto Config]: The machine automatically turns off after being left unoperated for a certain period of time unless the machine is in the following conditions.
-
A LAN cable is connected to the network interface connector.
-
A telephone cable is connected to the LINE connector.
-
Wireless LAN is enabled.
-
-
[Enable]: If you do not use the machine for a certain period of time, the machine automatically turns off.
-
[Disable]: Disables the Auto Power Off function. The machine does not automatically turn off.
Note
The machine does not automatically turn off in the following cases.
-
When an error has occurred
-
When a delayed transmission is reserved
-
When a fax transmission is waiting for a redial
Follow the steps below to change the Auto Power Off setting.
-
Press [Device Settings] on the touch panel.
-
Press
or 
several times and press [Admin Setup]. -
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999" respectively.
-
Press
or several times and press [User Install]. -
Press [Power Setup].
-
Press [Auto Power Off].
-
Select the value.