-
If paper is loaded on the MP tray, remove the paper.
-
Press the button (A) and open the output tray (a) completely.
Burns may result.
The fuser unit is extremely hot. Do not touch it.
-
Remove the four image drums from the machine and place the image drums on a flat surface.
Note
While removing consumables, be careful not to hit them to the LED head.
-
Cover the removed image drums with paper so that the image drums are not exposed to light.
-
Open the transparent cover inside the machine, remove the jammed paper slowly by pulling the edge of paper.
-
Put all four image drums back into the machine.
Note
While setting consumables, be careful not to hit them to the LED head.
-
Close the output tray (a) slowly and push the center of the output tray for confirmation.
-
When loading paper on the MP tray, load the paper with the print side face up.
Task is complete.