Printing is possible with less toner.
The amount of toner can be saved in three levels.
-
[Printer setting]: Conforms to the printer setting.
-
[Off]: Prints at a normal density without saving toner.
-
[Save Level Low]: Prints at a somewhat lower density level.
-
[Save Level Middle]: Prints at a low density.
-
[Save Level High]: Prints at a very low density.
Note
If using this function, only [Normal (600x600)] or [Fast (600x600)] can be specified as the print quality.
Memo
The density of the image that is printed with this function may vary depending on the printed document.
For Windows PCL Printer Driver
-
Open the file to print.
-
Select [Print] from the [File] menu.
-
Click [Preferences].
-
Select the [Setup] tab.
-
Select the amount of toner to save from [Toner saving].
-
Change other settings if necessary, and then click [OK].
-
Click [Print] on the [Print] screen.
For Windows PS Printer Driver
-
Open the file to print.
-
Select [Print] from the [File] menu.
-
Click [Preferences].
-
Select the [Color] tab.
-
Select the amount of toner to save from [Toner Saving].
-
Change other settings if necessary, and then click [OK].
-
Click [Print] on the [Print] screen.
For Mac OS X
-
Open the file to print.
-
Select [Print] from the [File] menu.
-
Select [Print Options] from the panel menu.
-
Select the amount of toner to save from [Toner Saving] in the [Quality2] tab.
-
Change other settings if necessary, and then click [Print].
Memo
If setting details are not displayed in the print dialog, click [Show Details] at the bottom of the dialog.