Names of Components

a

Operator panel

Basic Operations on the Operator Panel

This is the panel to operate the printer.

You can find touch panel and operation buttons on the panel.

b

USB port

Port to insert a USB memory.

c

MP tray (Multipurpose tray)

Envelopes and various sizes and thicknesses of paper can be printed.

d

Open button

Press this button to unlock when opening the output tray.

e

Output tray (Top cover)

Printouts are stocked here.

Open when changing consumables.

f

Wireless LAN module cover

Cover for installation part of the wireless LAN module.

g

Paper supporter

Draw this supporter when setting long size paper in the MP tray.

h

Envelope lever

Use this when printing on envelopes. For instructions, refer to "Printing on Envelopes".

a

Rear output tray

Open this when printing on thick paper, envelopes, etc. Paper will be output with the printed side up.

b

Power connector

Insert the supplied power code.

c

Interface connector cover

Covers the interface area.

d

Network interface connector

Insert a LAN cable when the machine is connected to a computer using the LAN cable.

e

USB interface connector

Insert a USB cable when the machine is connected to a computer using the USB cable.

a

LED head

LED which exposes printing part to light.

If printouts have vertical stripes or blurs around letters, clean the LED head.

b

Fuser unit

Fix toner on paper.

c

Toner cartridge / Image drum (Y: yellow)

Toner cartridges contain toner which is used for printing.

Image drum shapes letters and images.

Toner cartridges and image drums are consumables.

When the message on the LCD panel prompting you to change, please replace them accordingly.

d

Toner cartridge / Image drum (M: magenta)

e

Toner cartridge / Image drum (C: cyan)

f

Toner cartridge / Image drum (K: black)

g

Tray 1

Load paper to be printed on.