Registering a User Name and Password

You can restrict access to this machine by using a user name and password.

If you click (Save to device), the changed settings are reflected to this machine.

  1. Click [Start], and then select [All programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].

  2. Select the machine from [Registered Device Table].

  3. Select the [User Setting] tab.

  4. Click [Role Manager].

  5. Click [User name/Group management].

  6. Enter the administrator password, and then click [OK].

    The factory default password is "aaaaaa".

  7. Click (New(User)).

  8. Enter the user name and password.

    Memo

    You cannot use "admin" as a new user name.

  9. Click [OK].

  10. Click [Close].

  11. Click (Save to device).

  1. Click [Start], and then select [All programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].

  2. Select the machine from [Registered Device Table].

  3. Select the [User Setting] tab.

  4. Click [Role Manager].

  5. Click [User name/Group management].

  6. Enter the administrator password, and then click [OK].

    The factory default password is "aaaaaa".

  7. Select the user name to change.

  8. Change settings if necessary, and then click [OK].

  9. Click (Save to device).

  1. Click [Start], and then select [All programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].

  2. Select the machine from [Registered Device Table].

  3. Select the [User Setting] tab.

  4. Click [Role Manager].

  5. Click [User name/Group management].

  6. Enter the administrator password, and then click [OK].

    The factory default password is "aaaaaa".

  7. Select the check box of the user you want to delete.

  8. Click (Delete).

  9. Click [Yes] on a confirmation screen.

  10. Click (Save to device).