Printing Specifications

Printing method

Dry electrophotographic recording method with LED (Light-emitting diode)

Emulation T

PostScript 3, PCL5c, PCL6 (XL), EPSON FX, IBM ProPrinter, XPS, PDF (v1.7 or earlier)

Resident fonts

PCL: 87 european fonts

PS: 80 european fonts

Resolution

1,200 x 1,200dpi

600 x 600dpi

(Default: 600 x 600dpi)

Color

Yellow, Magenta, Cyan, Black

Print speed

• A4

  Simplex: Up to 23 ppm

  Duplex: Up to 19 ppm

• Letter

  Simplex: Up to 23 ppm

  Duplex: Up to 19 ppm

• A4

  Simplex: Up to 35 ppm

  Duplex: Up to 27 ppm

• Letter

  Simplex: Up to 35 ppm

  Duplex: Up to 27 ppm

First print out time

Standby

9.5 seconds or less

Power save

27 seconds

Paper size

Tray 1

Legal 13/13.5/14, Letter, Executive, Tabloid, Statement, 8.5 inches SQ, Folio, A3, A4, A5, A6, B4, B5, B6, 8K (260 x 368 mm, 270 x 390 mm, 273 x 394 mm), 16K (197 x 273 mm, 195 x 270 mm, 184 x 260 mm), Custom size

Additional tray unit (Optional)

Legal 13/13.5/14, Letter, Executive, Tabloid, 8.5 inches SQ, Folio, A3, A4, A5, B4, B5, 8K (260 x 368 mm, 270 x 390 mm, 273 x 394 mm), 16K (197 x 273 mm, 195 x 270 mm, 184 x 260 mm), Custom size

MP Tray

Legal 13/13.5/14, Letter, Executive, Tabloid, Statement, 8.5 inches SQ, Folio, A3, A4, A5, A6, B4, B5, B6, Index card (3 x 5 inches), 4 x 6 inches, 5 x 7 inches, Banner up to 52 inches, 8K (260 x 368 mm, 270 x 390 mm, 273 x 394 mm), 16K (197 x 273 mm, 195 x 270 mm, 184 x 260 mm), C4, C5, DL, Com-10, Custom size

Duplex Printing

Legal 13/13.5/14, Letter, Executive, Tabloid, A3, A4, A5, B4, B5, B6, 8.5 inches SQ, Folio, 8K (260 x 368 mm, 270 x 390 mm, 273 x 394 mm), 16K (197 x 273 mm, 195 x 270 mm, 184 x 260 mm), Custom size

Custom size

• Tray 1

  105 - 297 mm (W), 148, 182 - 431.8 mm (L) (4.1 - 11.7 inches (W), 5.8, 7.2 - 17.0 inches (L))

• Additional tray unit (optional)

  148 - 297 mm (W), 182 - 431.8 mm (L) (5.8 - 11.7 inches (W), 7.2 - 17.0 inches (L))

• MP tray

  64 - 297 mm (W), 90 - 1321 mm (L) (2.5 - 11.7 inches (W), 3.5 - 52 inches (L))

• Duplex

  128 - 297 mm (W), 182 - 431.8 mm (L) (5.0 - 11.7 inches (W), 7.2 - 17.0 inches (L))

Media type

Plain paper (64 g/m²- 256 g/m²), Envelopes, Label

Feeding method

Automatic feeding from Tray 1, MP tray and Additional tray unit (optional), Manual feeding from MP tray

Paper loading capacity

• Tray 1

  300 sheets (less than 80 g/m²), total thickness 30 mm or lower.

• MP tray

  100 sheets (less than 80 g/m²) and total thickness 10 mm or lower, 10 envelopes (85 g/m²).

• Additional tray unit (optional)

  535 sheets of Standard paper /80 g/m² and total thickness 53 mm or lower.

Output method

Face up/Face down

Paper output capacity

• Output Tray

  250 sheets (less than 80 g/m²)

• Upper Output Tray

  100 sheets (less than 80 g/m²)

• Rear Output Tray

  100 sheets (less than 80 g/m²), 10 sheets (ultra-heavy/envelopes)

Print guaranteed area

6.35 mm or more from the paper edge (not applicable to special media such as envelopes)

Print precision

Print beginning: ± 2 mm, paper skew: ± 1 mm/100 mm

Image expansion: ± 1 mm/100 mm (80 g/m²)

Warm-up time

• From power on

  32 seconds (at room temperature 25℃, rated voltage)

• From power save mode

  27 seconds (st room temperature 25℃, rated voltage)

Usage Environment Conditions

• When in operation

  10 - 32℃/ Relative Humidity of 20 - 80% (maximum wet bulb temperature of 25℃, maximum dry bulb temperature of 2℃)

• When not in operation

  0 - 43℃/ Relative Humidity of 10 - 90% (maximum wet bulb temperature of 26.8℃, maximum dry bulb temperature of 2℃)

Conditions for the guarantee of print quality

• Operating Range

  Temperature 10℃, humidity 20 to 80% RH

  Temperature 32℃, humidity 20 to 60% RH

  Humidity 20% RH, temperature 10 to 32℃

  Humidity 80% RH, temperature 10 to 27℃

• Full-color Print Quality Assured Range

  Temperature 17 to 27℃, humidity 50 to 70% RH

Consumables, Maintenance Unit

Toner cartridges, Image drums, Staple, Belt unit, Fuser unit, Feed roller set