Setting Paper Size Points/Toner Points

Note

Only when Point Calculation Type is a default setting, the setting is available on the Web page of the machine. If [Cost Settings] is not displayed, check the Point Calculation Type setting.

Set numbers of points for paper size and Color/Mono (Grayscale). For example, you can set so that bigger size paper needs more points or color printing needs more points than grayscale printing. Points are charged on a page-by-page basis, so when you print two pages, you need twice as much as the set rate.

In addition, you can apply point reduction system for two-sided printing or saving toner to print. The reduction rate for saving toner also depends on [Toner Saving Calculation Setting].

  1. Open the Web page of the machine.

  2. Log in as the administrator.

  3. Click [Account Management].

  4. Click [Cost Settings].

  5. Set paper size points, toner points.

    Memo

    The default value for each paper size point is calculated based on the area ratio of the paper to A4 paper.

  6. Set reduction rate for two-side printing and saving toner.

    To restore the factory default settings, click [Reset].

  7. Click [Submit].