Scanner Setup

Item				Factory default setting	Description
Default Settings	Color Mode			Auto (Color / Mono)	Sets the default scanning color.
	Scan Size			Auto	Sets the default scan size.
	Auto Scan Size		Default Size	A4 or Letter	Sets the standard size for automatic detection of document size.
	Auto Scan Size		Legal Size	Legal14	Sets the document length when the legal document is automatically detected.
	Direction			Top Edge on Top	Selects the default page orientation of documents.
	Mixed Scan			OFF	Sets whether to distinguish the document size when scanning documents of different sizes.
	Image Settings	Density		0	Sets the default density.
		Document Type		Text&Photo	Sets the image quality of documents.
		Background Removal		Auto	Sets the default the background removal.
		Show-Through Removal		Middle	Sets the default value of the show-through removal function.
		Resolution		200dpi	Sets the default resolution.
		Contrast		0	Sets the default contrast.
		Hue		0	Sets the default red-green color balance.
		Saturation		0	Sets the default saturation.
		RGB		R:0 G:0 B:0	Sets the default RGB contrast.
	Continuous Scan			OFF	Sets whether to use Continuous Scan mode by default.
	Preview			OFF	Sets the preview image of sending image.
	File Format	Auto(Color / Mono)		Multi-PDF	Selects the default file format. [Auto(Color / Grayscale)]/ [Color]/ [Grayscale] can be selected from Multi-PDF, Multi-HC-PDF, Single-PDF, Single-HC-PDF, Multi-PDF/A, Single-TIFF, Multi-TIFF, JPEG and XPS. [Auto(Color / Mono)]/ [Mono] can be selected from Multi-PDF, Single-PDF, Multi-PDF/A, Single-TIFF, Multi-TIFF and XPS.
		Auto(Color / Grayscale)		Multi-PDF
		Color		PDF
		Grayscale		PDF
		Mono		PDF
	Encrypted PDF Setting	Document Open Password		(NULL)	Sets the default password to open an encrypted PDF. A document open password cannot be the same as a permission password. You can enter up to 32 characters.
		Permissions Password		(NULL)	Sets the default password to control printing or editing on an encrypted PDF file. A permission password cannot be the same as a document open password. You can enter up to 32 characters.
		Display Default Password		Disable	Sets whether the registered password is displayed or not displayed on the password selection screen for the document open password or permission password. [Disable]: Displays the registered default password using* instead of each character. [Enable]: Displays the registered default password as it is.
	Compression Rate	Color		Medium	Selects a default compression level.
		Grayscale		Medium
		Mono		High
	Edge Erase	Setting		OFF	Sets whether to erase the edge shadow created in the surrounding of 2-page spread documents.
	Edge Erase	Width		5 mm (0.2 inch)	Sets an erasing width. Available range: 1 to 50 mm (0.1 to 2.0 inches) (1 mm increment)
	Center Erase	Setting		OFF	Sets whether to eliminate the shadow lines in the center of the two-spread document.
	Center Erase	Width		5 mm (0.2 inch)	Sets an erasing width. Available range: 5 to 50 mm (0.1 to 2.0 inches) (1 mm increment)
	White Page Skip			OFF	Sets whether to enable or disable the white page skip function.
E-mail Setup	Configure Shortcuts			01: Address Book 02: Group List 03: Tx History 04: Manual Input 05: LDAP	Sets the shortcut button for the [Scan To E-mail] tab.
	File Name			(NULL)	Sets a file name. You can enter up to 64 one-byte characters. The following options can be set.*¹ #n: adding a serial number from 00000 to 99999 #d: adding the date of a file creation (yymmddhhmmss) (yymmddhhmmss)
	Template	Edit Subject		Model name	Registers or edits e-mail subject text. You can enter up to 80 characters.
	Template	Edit Body		(NULL)	Registers or edits e-mail body. You can enter up to 256 characters.
	From / Reply To	From		(NULL)	Sets the e-mail address that is displayed in the [From] field. You can enter up to 80 characters.
		E-mail Sender ID		(NULL)	Sets the sender name that is displayed in the [From] field. You can enter up to 32 characters.
		Reply To	Address Book	(NULL)	Sets the e-mail address that is displayed in the [Reply to] column. You can enter up to 80 characters.
			Manual Input	(NULL)
			LDAP	(NULL)
	Broadcast Destination			ON	Sets whether an e-mail address confirmation screen is displayed before broadcasting the e-mail.
	MDN Response			OFF	Sets whether to request the MDN (message disposition notification) response.
	A/R Full Print			OFF	Set whether to print the transmission and reception history reports automatically.
	MCF Report			OFF	Sets whether to print a confirmation after transmission of Internet fax and Scan To E-mail.
	Timeout of MCF Report			15 minutes	Sets the timeout for printing a confirmation after transmission of Internet fax and Scan To E-mail. If the setting period of time is exceeded, the report is automatically printed without the MDN response.
	Print Check Message			OFF	Sets whether to report the error content if a transmission error occurs.
USB Memory Setup	File Name			(NULL)	Sets the default file name. You can enter up to 255 characters. The following options can be set as the default file name.*¹ #n: adding a serial number from 00000 to 99999 #d: adding the date of a file creation (yymmddhhmmss) (yymmddhhmmss)
Shared Folder Setup	Configure Shortcuts			01: Color Mode 02: Scan Size 03: Duplex Scan 04: File Name 05: SubFolder	Sets the shortcut button for the [Scan To Shared Folder] tab.
TWAIN Setup	Network TWAIN			ON	Sets whether to use the Network TWAIN.
TWAIN Setup	Port No.*²			9967	Sets the port number. Available range: 1 to 65535
WSD Scan Setup	WSD Scan			Enable	Specifies whether to use WSD Scan.
WSD Scan Setup	Binding			Long Edge Bind	Sets the default binding position.
PC Scan Mode				Simple Scan Mode	Selects the default PC scan mode.
Scanner Adjust	Scanner Calibration			Execute	Executes scanner calibration.
	Auto Color Judge Level			4	Sets the criteria of document color. Available range: 1 to 5
	White Page Skip Level			3	Sets the criteria of white page. Available range: 1 to 5
	Multi Feed Check	Setting		ON	Sets whether to enable or disable multiple feed detection function.
		Detection Accuracy		Normal	Sets the accuracy of multiple feed detection.
		Detection Cycle		Low	Sets the cycle of multiple feed detection.

^*1	For profiles, "#n" or "#d" can be specified for [File Name].
	If specifying "#n": 5-digit serial number from 00000 to 99999
	If specifying "#d": Date and time when a file is created. 12-digit number in yymmddhhmmss format
		yy:	Year created (the last two digits of the Christian Era)	hh:	Hours created (00 to 23)
		mm:	Month created (01 to 12)	mm:	Minute created (00 to 59)
		dd:	Date created (01 to 31)	ss:	Second created (00 to 59)
	* The date and time when a file is created are values of the timer of MC873.

An example of file name specification (if the file format is PDF)

If specifying "Data#n": Saved as file names such as "Data0000.pdf" and "Data00001.pdf".

If specifying "File#d": Saved as file names such as "File090715185045.pdf".

If specifying "Scan": "Scan.pdf" is created first, and then data is saved with the name of "Scan#.pdf".

For "#d", refer to the above.

^*2

To enable the changed setting, the network card must be restarted. Follow the instructions on the confirmation screen that is displayed when changing the settings, and restart the network card.