Setting Wireless LAN (WPA/WPA2-EAP)

Make a setting in the [IEEE802.1 X] menu before making this setting.

Setting IEEE802.1X (Wireless LAN)

  1. Open the Web page of this machine.

    Open the Web Page of This Machine

  2. Log in as the administrator.

  3. Click [Admin Setup].

  4. Select [Network] > [Wireless Setting] > [Manual Setup].

  5. Select [Wireless] for [Network Connection] in [Basic Settings].

    Memo

    "Disable" is set by default.

  6. Enter SSID name for wireless access point you want to connect in [SSID].

    Memo

    The entry box is blank by default.

  7. Select [WPA/WPA2-EAP] for [Security] in [Security Settings].

  8. When all the settings in Basic Settings and Security Settings are complete, press [Submit] on the bottom left of the web page to reflect the settings. It may take approximately one minute to establish the wireless AP connection. If connection fails, retry the wireless setting on the operator panel or switch to a wired LAN on the operator panel, and then retry the wireless setting on the web page of the machine.