Setting by Using PEAP

EAP authentication must be performed after computer connection is authenticated by enabling IEEE802.1X. This section describes how to set PEAP, which is an EAP authentication type.

  1. Open the Web page of this machine.

    Open the Web Page of This Machine

  2. Log in as the administrator.

  3. Select [Admin Setup].

  4. Select [Network] > [IEEE802.1X].

  5. Select [Enable] from [IEEE802.1X].

  6. Select [PEAP] from [EAP Type].

  7. Enter a user name in [EAP User].

  8. Enter a password in [EAP Password].

  9. Select [Authenticate Server], and then click [Import].

  10. Enter the file name of the CA certificate, and then click [OK].

    Specify the certificate issued by the certificate authority that the RADIUS server obtained. You can import a PEM, DER, and PKCS#7 file.

  11. Click [Submit].

    The new settings take effect when the network function of this machine restarts.

  12. Turn the machine off after this machine becomes online.

  13. Connect the LAN cable to the network interface connector.

  14. Connect the LAN cable to the authentication port of an authentication switch.

  15. Turn the machine on.

  16. Set up this machine.